HP CP4005 manual NON HP Supply, Use, Order Color Cartridge, Order Fuser KIT Less than X Pages

Control panel message	Description	Recommended action
Then press to
print second sides
Moving solenoid	The printer is executing a component test and	No action necessary.
To exit press. Stop	the component selected is a solenoid.
Moving solenoid and motor	The printer is executing a component test and	No action necessary.
To exit press. Stop	the components selected are the solenoid
	and the motor.
No job to cancel	There are no stored jobs that can be	No action necessary.
	canceled.
NON HP SUPPLY	The printer has detected that a non-HP print	If you believe you purchased an HP cartridge,
IN USE	cartridge is currently installed.	please call the HP fraud hotline (1–877–219–
		3183, toll-free in North America).
alternates with
			CAUTION Any printer repair
Ready			required as a result of using non-HP
			cartridges is not covered under HP
The supplies gauge will display the			warranty.
consumption levels of print cartridges, but the
level of any refilled cartridge will not be
shown.

ORDER [COLOR]

CARTRIDGE

The supplies gauge will display the consumption levels of print cartridges.

alternates with

Ready

The supplies gauge will display the consumption levels of print cartridges.

The identified print cartridge is nearing the end of its useful life. The printer is ready and will continue for the estimated number of pages indicated. Estimated pages remaining is based upon the historical page coverage of this printer.

Printing will continue until a supply needs to be replaced.

1.Press to view help for the message.

2.Obtain the part number for the print cartridge indicated.

3.Order a print cartridge

NOTE Supplies ordering information is also available from the embedded Web server. See Using the embedded Web server for more information.

ORDER FUSER KIT

LESS THAN X PAGES

For help press

alternates with

Ready

The fuser is near the end of its life. The printer is ready and will continue for the estimated number of pages indicated.

Printing will continue until a supply needs to be replaced.

1.Press to view help for the message.

2.Obtain the part number for the fuser kit.

3.Order the fuser kit.

NOTE Supplies ordering information is also available from the embedded Web server. See Using the embedded Web server for more information.

ORDER SUPPLIES	More than one supply item is low.	1.	Press Menu to access the menus.
alternates with	Printing will continue until a supply needs to	2.	Press	or	to highlight
Ready	be replaced.		INFORMATION, and then press .
		3.	Press	or	to highlight SUPPLIES
For help press			STATUS, and then press .
The supplies gauge will display the		4.	Press	or	to highlight a supply that
consumption levels of print cartridges.			needs to be ordered.

ENWW Control panel messages 173