HP CP4005 manual Setting a custom size in Tray 2 or optional Tray

6.Press or to highlight the correct paper type.

7.Press to select the correct paper type.

A Setting saved message appears, and then the current type and size settings are displayed.

Configuring Tray 2 and optional Tray 3 for a custom paper size

The printer automatically detects many sizes of paper, but you can also configure trays for custom paper sizes. You must specify the following parameters:

●Unit of measure (millimeters or inches)

●X dimension (the width of the page as it feeds into the printer)

●Y dimension (the length of the page as it feeds into the printer)

1

2

3

4

Media width guides

Media length guides

Page width (X dimension)

Page length (Y dimension)

Use the following procedure to configure a tray for a custom size. Once a custom size is set for a tray, it will be retained until the media length guides are reset.

Setting a custom size in Tray 2 or optional Tray 3

1.Open the tray and place the media face-up in the tray.

2.Set the media length guides to the appropriate non-standard position and close the tray.

3.When the tray configuration message appears, press .

4.Press to change ANY CUSTOM to custom.

5.Press to select custom.

6.Press or to highlight the correct unit (either millimeters or inches).

ENWW Configuring input trays 85