Lightolier 302ESX specifications 3 3/4 95mm aperture, Lytecaster, Line Voltage 120V ES16 ESD16

03-03

3 3/4" (95mm) aperture	Lytecaster
Line Voltage 120V ES16 ESD16	Recessed Downlight
Standard Frame-In-Kit (Non-IC)

302ESX

Complete fixture consists of Reflector Trim & Frame-in Kit. Select each separately

POWER PACK	CUT-OUT
302ESX	3 3/4" (95mm)

Features

Mounting Frame : 20ga. galvanized steel. Four slots are positioned 90º apart to simplify alignment.

Mounting Bars: (4) 18 ga. galvanized steel. 13" (330mm) long bars extend to 27" (686mm), rotatable and lockable, integral T-bar tabs. Spike detail eliminates the need of additional nailing.

Mounting Bars Locking Clip : (1) locks mounting bars in place.

Snap-on Socket Cup : 22ga. galvanized steel. Easy snap-on to housing.

Socket : Porcelain body ; Twist and lock (GZ base) Pre-wired with 18 ga. Teflon 250º leads to junction box.

Junction Box : 4"(102mm) x 3"(76mm) x 2"(51mm) 18 ga. galvanized steel . CSA/UL certified for maximum of 8 No. 12 ga. 90º C through branch circuit conductors. Integral cable clamp permit attachment of non metallic Loomex without need of additional connectors. Pry-out knock-outs accept BX cable. Easy access from both sides with snap-on covers.

Thermal Protector : Meets CSA/UL requirements. Insulation, if used, must be kept 3" (76mm) away from luminaire sides and junction box.

REFLECTOR TRIM

Accepts most 3 3/4" (95mm) 300 serie trims ; see Reflector Trim specification sheets.

Accessories

Mounting Bars Extenders : 1964

20" (508mm) long. Set of 2

Mounting Bar Locking Clips : 0098

To lock mounting bars in place after installation. Set of 12.

Labels : CSA , UL

Damp or Wet location rated depending on trim used.

WE RESERVE THE RIGHT TO CHANGE DETAILS OF DESIGN, MATERIALS AND FINISH, IN ANY WAY THAT WILL NOT ALTER INSTALLED APPEARANCE OR REDUCE FUNCTION AND PERFORMANCE.

Lightolier CFI, 3015 Louis Amos Lachine, (Quebec) H8T 1C4