Lightolier 6000 Page 3 of, Stem mounts to track, not feed connector. 18 Stem 48 Stem, Type

Basic Lytespan® 1 Circuit Track  6000

Page 3 of 4

Track Mounting and Power Feed Systems

Stem Mounting Kits

Mounts to a 4" or 3" octagon outlet box. Use two per 2' and 4' track, three per 8' and 12' track. When making a run of track do not exceed 4' between stems. Use additional stems for additional support. Power is fed to the track with the stem closest to the track feed-in point. For power feed to Feed Track and Live End, "L", "T", "X", In-line, and Variable Angle Connectors. Stem can be field cut.

Not recommended for wall mounting.

Stem mounts to track

not feed connector. 18" Stem 48" Stem

Actual length from
ceiling to top of track:	17 3/8"	47 3/8"
Matte White	7584	7586
Matte Black	7683	7681

3" or 4" Octagon Outlet Box

(by others)

This end may be field cut.

Stem 1/4"-18

NPSM Thread

Clamp Set

Track

Swivel Stem Mounting Kits

Adjusts from 0 to 90. Mounts to a 4" or 3" octagon outlet box. Use two per 2' and 4' track, three per 8' and 12' track. When making a run of track do not exceed 4' between stems. Use additional stems for additional support. Power is fed to the track with the stem closest to the track feed-in point. For power feed to Feed Track and Live End, "L", "T", "X", In-line, and Variable Angle Connectors. Can be field cut. 48" stem.

Not recommended for wall mounting. Stem mounts to track not feed connector.

7480 Matte White

7481 Matte Black

3" or 4" Octagon Outlet Box

(by others)

0-90 Ceiling Slope

This end may be field cut.

Stem 1/4"-18

NPSM Thread

Clamp Set

Track

Direct Feed into Connectors

The Live End, "L", "T", "X", In-line, and

Variable Angle Connectors contain a nut with a 1/2-14 thread to accept a 3/8" or 1/2" (trade size) electrical connector, 3/8" connector recommended. Does not require a separate power feed kit.

3/8" Connector

(by Others)

Live End

Track Unit

Conduit Adaptor

For feeding power to Live End from secure

cable terminating in a 3/8" (trade size)

electrical connector. Conduit must be self

supporting. For use with 6048 and 6046. 7596 Zinc Plate

Live End

Conduit

Adaptor

Track Unit

3/8" Connector (by Others)

Stem Extension Kit

Mounts to any stem kit to extend its length by 48". Cannot be field cut.

7582 Matte White

7680 Matte Black

Stem Extension

1/2" O.D. Steel

Tube

1/4-18 NPSM

Thread.

Clamp Set

In-Line Connector

Permits power feed between track units in a

straight run of track. The In-Line Connector is

polarized and pre-wired. KO permits direct

feed with electrical connector.

6054NWH Matte White

6054NBK Matte Black

6054NAL Aluminum

4-1/8"

Power Extension Connector

Replaces Dead End Cover at end of track to

permit power continuity around structural

obstacles to another track section.

Accepts same power feed-in kits as Live End.

6046NWH Matte White

6046NBK Matte Black

6046NAL Aluminum

Over Beam or Through Beam

		Beam
3/8"
Connector		Jump
Track		Track
Power Extention		Power Extention
Connector	Wall	Connector
Through Wall or Column
3/8" Connector		Jump (Conduit)
Track		Track
Power Extention		Power Extention
Connector		Connector
	Wall

Job Information Type:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group • E0908

Lightolier is a Philips group brand