Page 4 of, Basic Lytespan 1 Circuit Track, Job Information

Basic Lytespan® 1 Circuit Track 6000

Page 4 of 4

Track Mounting, Power Feed Systems and Mounting Patterns

Variable Angle Connector

The Variable Angle Connector is pre-wired and polarized. It contains a die-cast zinc nut which accepts a standard 3/8" threaded conduit fitting. Flexes to any angle between 0-90.

6053WH Matte White

6053BK Matte Black

6053NAL Aluminum

7-1/4"

0-270

Live End

Energizes Track from the beginning of a run. KO permits direct feed with electrical connector. It is included with Individual Track Units. Use with plain track units.

6048NWH	Matte White
6048NBK	Matte Black
6048NAL	Aluminum

Live End 2-3/4"

Knock Out

Screw

"L" Connector

The "L" connector is polarized and pre-wired. It may be rotated for right angle or left angle turn. KO permits direct feed with electrical connector.

6050NWH Matte White

6050NBK Matte Black

6050NAL Aluminum

2-5/8"

"T" Connector

Wall

Bottom Cover

Track Unit

The "T" connector is not pre-wired or polarized. Used to make "T" pattern with

Inside

Corner

Wall

Outside

Corner

Ceiling to Wall

Floating Invisible Feed

Can be mounted anywhere along the track at a maximum distance of 4' from edge of track extrusion. Accepts conduit or cable with 3/8" or 1/2" electrical connector (by others). Can be used with Live End, "L", "T", "X", and In-Line and Variable Angle connectors. Use Track Mounting Clips to mount the track.

26082 Zinc Plated

	3/8"
	Electrical
Wire Cover	Fitting
	(by others)

Mini-Coupler

Used to connect two pieces of track together mechanically and electrically. Power cannot be fed to the Mini-Coupler. It is included with Joiner Track Units.

6049NWH	Matte White
6049NBK	Matte Black
6049NAL	Aluminum

Track Unit

Mini-Coupler

Track Unit

Coupler

Screws

Cord and Plug

Energizes track from a polarized 120V receptacle. Especially useful with plain track. Supplied with a 15' two conductor 18 ga. cord and In-Line switch. The switch is supplied unattached. The track is not to exceed 1200 watts. The switch is rated for 6 amps, 720 watt with cord and plug attached.

6062WH Matte White

6062BK Matte Black

track. 12 ga. copper jumper wires supplied to make all necessary connections. KO permits direct feed with electrical connector.

6051NWH Matte White

6051NBK Matte Black

6051NAL Aluminum

4-1/8"

"X" Connector

The "X" connector is not pre-wired or polarized. Used to make "X" pattern with track. 12 ga. copper jumper wires supplied to make all necessary connections. KO permits direct feed with electrical connector.

6052NWH Matte White

6052NBK Matte Black

6052NAL Aluminum

4-1/8"

Clamp Set

Track

Job Information

Type:

Lightolier is a Philips group brand

Lightolier 6000 Page 4 of, Basic Lytespan 1 Circuit Track, Lightolier is a Philips group brand

Models: 6000

Page 4 of 4