![INSTRUCTIONSHEETNO.](/images/new-backgrounds/40623/406233x1.webp)
INSTRUCTIONSHEETNO.
1S:6196 | INSTRUCTIONS FOR AITACHING COIL CORD |
MONOPOINT (Cent’d) | |
FORUSEWITH LIGHTOLIERTRACKFIXTURESONLY | |
A1294 Page 2 of 2 |
|
INSTRUCTIONS FOR ATTACHING LYTESPOT WITH SQUAT ADAPTOR TO COIL CORD CLAMP
1, Insertthe SQUATADAPTERinto the MONOPOINTADAPTORThe. LOCKING LEVER must be on the same side as the BEAD located on the
MONOPOINT ADAPTOR (See Fig. 5). Rotate the SQUAT ADAPTOR 90 degrees clockwise until LOCKING LEVER locks into place (See Fig. 5, 6 & 7).
2. To remove, depress LOCKING LEVER and rotate SQUAT ADAPTOR 90 degrees counterclockwise.
I CAUTION- SUPPORT THE MONOPOINT ADAPTOR WHENEVER MANIPULATING THE FIXTURE. I
|
| MONOPOINT |
BEAD |
| ADAPTOR |
LOCKING |
| SQUAT |
LEVER |
| ADAPTOR |
L | * | 1 |
*
&‘
FIG.5 | FIG.6 | FIG.7 |
INSTRUCTIONS FOR AllACHING LOW VOLTAGE TO COIL CORD CLAMP
1.Insert the LOW VOLTAGE ADAPTOR into the MONOPOINT ADAPTOR. The LOCKING LEVER must be on the same side as the BEAD located on the MONOPOINT ADAPTOR (See Fig. 8). Rotate the LOW VOLTAGE ADAPTOR 90 degrees clockwise to secure fixture and make
electrical connection (See Fig. 8,9 & 10).
2, To remove, rotate LOW VOLTAGE ADAPTOR 90 degrees counterclockwise.
I CAUTION- SUPPORT THE MONOPOINT ADAPTOR WHENEVER MANIPULATING THE FIXTURE. I
MONOPOINT
RFAD | ADAPTOR | % |
| ||
LOCKING“~ |
| |
LEVER | / ADAPTOR |
|
—
FIG.8 | FIG.9 | FIG. 10 |