Lightolier 61XMCE Track Mounting, Power Feed Systems and Mounting Patterns, Connector

Advent Lytespan® 1 and 2 Circuit Track  61XMCE

Page of 3

Track Mounting, Power Feed Systems and Mounting Patterns

Variable Angle Connector

The Variable Angle Connector is pre-wired and polarized. Connector will accept an M20 (3/8" or 1/2") electrical fitting. (Use Locknut from Cast Plug or 3/8" or 1/2" fitting.) Connector flexes in all directions.

6153ALCE  Matte Aluminum 6153BKCE  Matte Black 6153WHCE  Matte White

11-3/4"

0-90

Wall

Inside

Corner

Wall

Outside

Corner

Ceiling to Wall

Power Extension Connector

Replaces Dead End Cover at end of track to permit power continuity around structural obstacles to another track section.

Accepts same power feed-in kits as Live End.

6146ALCE  Matte Aluminum 6146BKCE  Matte Black 6146WHCE  Matte White

Over Beam or Through Beam

M20 (3/8" or 1/2")		Beam
Connector		Jump
Track		Track
Power Extension		Power Extension
Connector	Wall	Connector
Through Wall or Column
M20 (3/8" or 1/2")		Jump (Conduit)
Connector
Track		Track
Power Extension		Power Extension
Connector		Connector
	Wall

Direct Feed into Connectors		"L" Connector
The Live End, “L”, ”T”, “X”, In-Line & Variable		The "L" connector is polarized and pre-wired.
Angle Connectors will accept an M20 (3/8" or		It may be rotated for right angle or left angle
1/2") electrical fitting. Does not require a		turn. KO permits direct feed with electrical
separate power feed kit.
		connector.
M20 (3/8" or 1/2")		6150ALCE	Matte Aluminum
		6150BKCE	Matte Black
Connector (by others)		6150WHCE  Matte White
Cast Plug	Track Unit
Live End	Locknut	3-11/32"
	Live End Cover	"T" Connector
		The "T" connector is polarized and pre-wired.
		Used to make "T" pattern with track. (See
		fig. 1) 12 ga. copper jumper wires supplied to
1/2" 14 Thread,		make all necessary connections. KO permits
		direct feed with electrical connector.
Integral with Live End
	Track Unit	6151**CE1 External Right AL
	Live End	6151**CE2 External Left AL
		6151**CE3 Internal Right AL
	M20 (3/8" or 1/2") Fitting, 3/8" recommended	6151**CE4 Internal Left AL
		**Finishes: AL		Matte Aluminum
	(by others). Note: Use M20 locknut (not
	shown) with M20 Fitting (by others). No		BK	Matte Black
	locknut needed with 3/8" or 1/2" fitting.
			WH Matte White

	6151XXCE2	5-1/2"
Neutral	External Left
Track (Typ)	Neutral	"X" Connector
		The "X" connector is not pre-wired or
	6151XXCE1	polarized. Used to make "X" pattern with
Neutral		track. 12ga. copper jumper wires supplied to
	External Right
		make all necessary connections. KO permits
		direct feed with electrical connector.

		6152ALCE	Matte Aluminum
		6152BKCE	Matte Black
	6151XXCE4	6152WHCE  Matte White
Neutral	Internal Left
	Neutral
Neutral	6151XXCE3		5-1/2"
	Internal Right

Fig. 1 View from Floor

Job Informationv Type:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group • 0408

Lightolier is a Philips group brand