Advent Lytespan® 1 and 2 Circuit Track 61XMCE
Page of 3
2
3
1.59mm |
|
127.78mm | 4 |
6 | 5 |
| 1 |
7 | 29.46mm |
| 2000mm |
| 3000mm |
| 4000mm |
|
|
| Plain Track | ||
|
|
|
|
|
|
Finishes | Plain Track |
|
|
|
|
| 2m Catalog No. | 3m Catalog No. |
| 4m Catalog No. |
|
Aluminum | 612MALCE | 613MALCE |
| 614MALCE |
|
Black | 612MBKCE | 613MBKCE |
| 614MBKCE |
|
White | 612MWHCE | 613MWHCE |
| 614MWHCE |
|
|
|
|
|
|
|
Features
1.Advent Lytespan Track:
2.Track Mounting Clips: 0.61mm Spring steel, in black or white; furnished with track units.
3.Toggle Bolt & Screws: furnished with track units.
4.Conductor (3): 16A current carrying capacity.
5.Insulating Liner: 1.2mm wall, thermoplastic.
6.Neutral Conductor: on bead side of track.
7.Polarity Bead: identifies the neutral conductor.
8.Live End: molded thermoplastic. Includes contacts for power supply leads.
9.Dead End Cover: molded thermoplastic.
10.Mini Coupler: connects track units mechanically and electrically.
is polarized and continuously grounded throughout. Electrical conductors are concealed in a insulating liner. Lytespan lighting units attach to the track at any point and can be adjusted to operate on either track circuit. Not intended for use with a power cord or a convenience receptacle adapter. Magnetic and electronic transformers require different dimmer controls. Use the proper control device on the track. Caution should be used when operating dimming controls on 3 wire circuiting (the neutral conductor may overload). For additional information on dim- ming, call
Labels
I.B.E.W.,CE
Mechanical
Track units plug together and lock securely to prevent accidental separation. Track units can be field cut.
Finish
All painted finishes are baked enamel.
Mounting
Track may be surface mounted to ceilings or walls. The track may be stem mount- ed. The track is not intended to be cable mounted. The track can also be recessed, see Specification Sheet 7515.
Electrical
Two circuits individually controllable, rated 16 amps, at 220 - 240 volts 50 Hz per track circuit (16 amps total for the two circuits), when supplied by a 220/240 volt, 50 Hz, single phase
U.S. Patent Nos. 4,096,349; Other Patent Pending
Job Information | Type: |
|
|
Job Name:
Cat. No.:
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508)
