INSTRUCTION SHEET NO.
1S:8276
0892 Page20f2
OPERATION
1.AIMING ADJUSTMENTS
Simply rotate LYTESPOT to the desired position as indicated in Fig. 1.
FIG. 1
1.LAMPING
To prevent electrical shock, turn off power to track. Pull louver it snaps out of holding clip, then pull sideways until it detaches up locking tabs to the inside edge of fixture’s opening, then push
PROD. #
(12”) 8276- Twin Tube 18W
(14)8277- Twin Tube 27W
straight out with both from the lamp socket louver until it snaps in
hands. To remove lamp, swing lamp from the end until (see Fig. 2), Install new lamp. Replam louver by lining position. See list below for selection of appropriate lamp.
LOCKING
TABS
FIG. 2
