Lightolier C3 Series manual C3 Series Emergency Power ModuleC3, Page 1 of, How to Specify, Type

	C3 Series Emergency Power Module  C3
Page 1 of 2	12 Volt 50 and 75 Watts for Support of Outdoor Emergency Luminaires

The C3 Series is designed to support 12 VDC outdoor or indoor emergency luminaires located within close proximity of an emergency exit. The C3 Series emergency power module offers an inconspicuous alternative to wall-mounted emergency products used to support remote emergency luminaires.

	5.63”
	(14.3 cm)
5.75”	4.5”
(14.6 cm)	(11.4 cm)

9.5”

(24.1 cm)

How to Specify:

	C3		2
	SERIES	DC VOLTAGE		OUTPUT
				WATTAGE
C3 = C3 Series Power		2 = 12 volt		50 = 50 Watts
Module				75 = 75 Watts

L

BATTERY	TRIM COVER
	FINISH
L = Sealed Lead	W = White
Calcium	B = Black

Features

1.Illumination: The C3 Series is a suggested emergency power source for the LP Series interior/exterior low level LED luminaire, the LLEF Series MR16 exterior wall/soffit remote, and the LLRE Series recessed MR16 exterior remote. See back page for more information on these products. In addition, any 12 VDC remote emergency luminaire can be powered by the C3 power module.

2.Housing: Rough-in enclosure fabricated from 20 gauge die-formed galvanized steel. Trim plate fabricated from 12 gauge steel and is painted with a matte white powder coat finish, or optional matte black finish.

3.Electronics: Automatic voltage regulated charging system. 2-state charger eliminates the need for periodic battery exercising. Pre-wired plug-in receptacle is provided within the enclosure for routing 12 VDC emergency power to remote emergency luminaires.

4.Battery: Maintenance-free, sealed lead calcium battery has an estimated service life of 5 years, and an operating temperature range of 65°F (19°C) to 85°F (30°C). Damp location unit has an operating temperature range of 50°F (10°C) to 104°F (40°C). The C3250 power module uses (2) 100-1-136 batteries, and supplies 50 watts at 12 VDC for 90 minutes. The C3275 uses

(2) 100-1-188 batteries and supplies 75 watts at 12 VDC for 90 minutes.

5.Input Power Requirements: C3250: 120 VAC: 0.22 amps; 277 VAC:

0.11amps; C3275: 120 VAC: 0.21 amps; 277 VAC: 0.11 amps

Code Compliance

UL 924 listed. UL Damp Location Listing optional on 50 watt modules.

Options

DL = UL Damp Location Listing

Available on 50 watt unit only.

Accessories

BHK1 = Bar Hanger Kit for Mechanical Ceilings

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group • C0308

Lightolier is a Philips group brand