Lightolier Calculite Matrix HID Lensed Wall Wash C4X4MRL, Page 1 of, Features continued, Lamp

	Calculite® Matrix HID Lensed Wall Wash  C4X4MRL
Page 1 of 1	4½" X 4½" Square Aperture (1) 20W CMH MR16

8"

9.66"

8.16"

4.5"

5.75"

9.66"

Ceiling Cutout: 5 1/4" x 5 1/4" (130 mm x 130mm) Dia.

Ordering Information

2"

Max. Ceiling

Thickness

Frame-In Kits	Reflector Trims	Finish/Flange	Lamp
C4X420MREU Electronic 120/277V	C4X4MRLCLW	Specular Clear/White	(1) 20W MR16 CMH GXIC Base
	C4X4MRLCLP	Specular Clear/Polished
	C4X4MRLCCLW	Comfort Clear/White
	C4X4MRLCCLP	Comfort Clear/Polished
	C4X4MRLCCDW	Comfort Clear Diffuse/White
	C4X4MRLCCDP	Comfort Clear Diffuse/Polished
	C4X4MRLWHW	White/White

Features

1.Reflector Trim: 55° physical and reflected cutoff. Available with integral flange painted white or polished to match inside of cone.

2.Lamp Holder/Trim Adjustment Assembly: Unitized optics ensure alignment of lamp and aperture cone regardless of ceiling thickness. Directional and soft focus lens ships standard. Adjust trim kit vertically to accommodate up to 2" thick ceiling.

3.Socket: Twist and lock base. 5kV (600V) pulse rated PPS, black T240 body socket with nickel-plated contacts. 18 AWG silicone leads with fiberglass outer sleeve.

4.Frame Housing: Steel, 0.029" (22-Ga.), matte black finish. Removable cover for top relamping.

5.Frame Vertical Adjustment Mechanism: Accommodates mounting to virtually any ceiling system using pre-installed mounting bars, or ½" EMT tubing (by others). Single locking feature secures all adjustments. Alignment holes and markings allow fixture to be pre-set prior to installation. Final adjustment can be made from below from inside the fixture.

6.Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping bars extend to 30" long and lock securely into position. Built-in locking tabs provide positive attachment to common T-bar systems. Self-centering feature simplifies installation in 24" O.C. grid systems. Attaches to steel or wood joists without accessories.

7.Retention Springs: Rust resistant springs secure trim for quick, tool-less installation.

8.Ballast/Cover Assembly: Accessible from below and removable without tools for inspection and ballast replacement.

9.Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG, 90°C through branch circuit conductors. Allows inspection from below.

10.Thermal Protector: Meets NEC and UL requirements. Do not install insulation above nor within 3" (76mm) of any part of the luminaire.

11.Electronic Ballast: 120 or 277V, 50/60 Hz., encased, high power factor >0.99, THD <10%, thermally and transient protected, RMI/RFI complies with FCC Part 18 non-consumer limits, shut-down at end of lamp life, sound rating “A", Minimum starting temperature -30°, Type 1 Outdoor rating.

Features (continued)

Ballast	ANSI Code	Voltage	Max. Amps	Input Watts
20W MH	M156	120/277V	0.20/0.09	22

Options and Accessories

Does not accept any optical accessories.

Labels

UL, cUL (Suitable For Wet Locations)

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2007 Genlyte Group LLC • A0507