Lightolier Calculite Matrix HID Lensed Adj. Accent C4X4MRW, Page 1 of, Features continued

	Calculite® Matrix HID Lensed Adj. Accent  C4X4MRW
Page 1 of 1	4½" X 4½" Square Aperture (1) 20W CMH MR16

8"

9.66"

8.16"

4.5"

5.75"

9.66"

Ceiling Cutout: 5 1/4" x 5 1/4" (130 mm x 130mm) Dia.

Ordering Information

2"

Max. Ceiling

Thickness

Frame-In Kits	Reflector Trims	Finish/Flange	Lamp
C4X420MREU Electronic 120/277V	C4X4MRWCLW	Specular Clear/White	(1) 20W MR16 CMH GXIC Base
	C4X4MRWCLP	Specular Clear/Polished
	C4X4MRWCCLW	Comfort Clear/White
	C4X4MRWCCLP	Comfort Clear/Polished
	C4X4MRWCCDW	Comfort Clear Diffuse/White
	C4X4MRWCCDP	Comfort Clear Diffuse/Polished
	C4X4MRWWHW	White/White

Features

1.Reflector Trim: 55° physical and reflected cutoff. Available with integral flange painted white or polished to match inside of cone.

2.Lamp Holder/Trim Adjustment Assembly: Unitized optics ensure alignment of lamp and aperture cone regardless of ceiling thickness. Patented EZ Aim™ gear-driven adjustment features an optimized lamp path to maximize light output at tilt angles up to 45°. Aiming indicator ensures accurate lamp positioning. Solite lens ships standard. Adjust trim kit vertically to accommodate up to 2" thick ceiling.

3.Socket: Twist and lock base. 5kV (600V) pulse rated PPS, black T240 body socket with nickel-plated contacts. 18 AWG silicone leads with fiberglass outer sleeve.

4.Frame Housing: Steel, 0.029" (22-Ga.), matte black finish. Removable cover for top relamping.

5.Frame Vertical Adjustment Mechanism: Accommodates mounting to virtually any ceiling system using pre-installed mounting bars, or ½" EMT tubing (by others). Single locking feature secures all adjustments. Alignment holes and markings allow fixture to be pre-set prior to installation. Final adjustment can be made from below from inside the fixture.

6.Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping bars extend to 30" long and lock securely into position. Built-in locking tabs provide positive attachment to common T-bar systems. Self-centering feature simplifies installation in 24" O.C. grid systems. Attaches to steel or wood joists without accessories.

7.Retention Springs: Rust resistant springs secure trim for quick, tool-less installation.

8.Ballast/Cover Assembly: Accessible from below and removable without tools for inspection and ballast replacement.

9.Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG, 90°C through branch circuit conductors. Allows inspection from below.

10.Thermal Protector: Meets NEC and UL requirements. Do not install insulation above nor within 3" (76mm) of any part of the luminaire.

11.Electronic Ballast: 120 or 277V, 50/60 Hz., encased, high power factor >0.99, THD <10%, thermally and transient protected, RMI/RFI complies with FCC Part 18 non-consumer limits, shut-down at end of lamp life, sound rating “A", Minimum starting temperature -30°, Type 1 Outdoor rating.

Features (continued)

Ballast	ANSI Code	Voltage	Max. Amps	Input Watts
20W MH	M156	120/277V	0.20/0.09	22

Options and Accessories

Accepts one optical accessory

2" diameter color filter/specialty filter: ADF2/AF2

2" diameter louver: AL2HC

Labels

UL, cUL (Suitable For Wet Locations)

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2007 Genlyte Group LLC • A0507