|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Architectural Decorative IS:CCLRD01 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Page 1 of 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Instruction Sheet for Assembly and Installation | |||||||
Read and understand these instructions before installing luminaire
This luminaire control is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.
Retain these instructions for maintenance reference.
Introduction
Color rotary dial control is a digital lighting controller that features eight
Included in this box:
Color Rotary Dial Control
Knob
Fig. 1
Note: Face Plate (supplied by others)
•Color rotary dial control assembly
•Knob
•(2)
Additional items needed:
•Single or multi gang wall box
•CAT 5 data cable, unshielded twisted pair, flying
•18 AWG power cable with flying leads or 18 AWG power cable with BNC connector and coupling. Refer to the wiring diagrams to deter- mine your installation requirement.
•Face Plate
Lightolier is a Philips group brand
Identification and Warnings of Safety Hazards
In accordance with ANSI Z535.4 the following system of identifying the severity of the hazards associated with the products is used:
“Danger” Imminently hazardous situation which, if not avoided, will result in death or serious injury.
“Warning” Potentially hazardous situation that, if not avoided, could result in death or serious injury.
“Caution” Potentially hazardous situation that, if not avoided, may result in minor or moderate injury or property damage.
Warning: Ensure that main power supply is off before installing, wiring, or servicing the color rotary dial control. Failure to adhere to these instructions can result in death or serious injury.
Warning: The color rotary dial control must be installed by a qualified professional in accordance with NEC and relevant local codes. Failure to comply can result in death, serious injury, or property damage.
Warning: Do not attempt to install or use the color rotary dial control until you read and understand the installation instructions and safety labels. Failure to adhere to these instructions could result in serious injury or property damage.
Caution: Do not modify or alter the color rotary dial control. Doing so will void the warranty.
Caution: Color rotary dial control has no user serviceable parts. Do not open. Doing so will void the warranty.
Owner/User Responsibilities
It is the responsibility of the contractor, installer, purchaser, owner, and user to install, maintain, and operate the color rotary dial control in such a manner as to comply with all state and local laws, ordinances, regula- tions, and the American National Standard Institute Safety Code.
631 Airport Road, Fall River, MA 02720 • (508)
