Lightolier MINI-BEAM (MB) HP90 Lens Removal, 6For Mini-BeamBallast Access Cover Compartment

4To install fixture into the ceiling system (by others), bend Earthquake Clips out 90 degress from Housing End. Install fixture into ceiling system. Secure the fixture to the ceiling system by bending the Locking Tabs on the Earthquake Clips towards the T-bar.

Housing

Earthquake

Clip

Locking Tab

Housing

Earthquake

Clip

				T-bar
				(by
				others)
	Locking
	Tab
			Earthquake
			Clip
T-bar
		Locking
(by others)		Tab

5Install fixture into Ceiling System (by others). For Coffaire (CF) and Mini-Beam (MB), open Lamp Shield by gripping Narrow Flange of Lamp Shield and pull Lamp Shield towards you, letting the opposite side of the Lamp Shield rest on the Hinge Pins (Wide Flange).

Coffaire

Mini-Beam

Ceiling System (by others)

COFFAIRE (CF) MINI-BEAM (MB)

Hinge Pin (Wide Flange)

Hinge Pin

(Narrow Flange)

Lamp Shield

HP90 Lens Removal

Push Lens to one side OA , and pull Lens off Hinge Pins OB and downward. Unlink Lens from all Hinge Pins (both ends of fixture) clearing the lamps for removal.

Hinge Pin

Lens

OA

OB

6For Mini-Beam Ballast Access Cover Compartment.

Ballast is accessed by removing the ceiling tile adjacent to the Mini-Beam. Remove Screw at end of Ballast Access Cover and slide Ballast Access Cover towards Housing End. Lift Ballast Access Cover for easy access to Ballast. To replace Ballast Access Cover reverse the procedure.

Ballast Access

Cover

Screw

Housing End