Lightolier Page 2 of, Specifications continued, VP PARABOLIC DZA1G16MS140, Job Information

Section 2/Folio G09-25

	VP PARABOLIC DZA1G16MS140
Page 2 of 2	1’ x 4’ RECESSED FLUORESCENT 16 CELL PARABOLIC LOUVER
	STATIC AND AIR SUPPLY/RETURN IES RP24 PREFERRED

ORDERING INFORMATION Explanation of Catalog Number. Example: DZA1G16MS140120OC

Specifications

PERFORMANCE: In an installation of 2 lamp 32W luminaires in a room cavity ratio of 1 reflectance 80% ceiling, 50% wall, 20% floor the C.U. shall no be less than 0.69. To prevent glare the VCP shall not be less than 88 either lenghtwise or crosswise (at 100 fc level) and that the average luminance will conform with the IES RP-24 preferred standard, and have a fixture efficiency of not less than 60%.

MATERIALS: Chassis parts are die formed 22 gauge cold rolled steel. Faceplate is die formed 20 gauge cold rolled steel with edges hemmed for rigidity.

LOUVER: Post-anodized aluminum.

Specifications (continued)

ELECTRICAL: Rapid start HPF thermally protected class “P” ballast CBM certi- fied by ETL if K.O. is within 3” of ballast use wire suitable for at least 90°.

LABELS: Listed by CSA/UL.

Job Information Type:

FINISH: Louver - Low iridescense specular postanodized vertical grain sheet or Low iridescence reflector matte post-anodized vertical grain sheet. Chassis exterior - white baked polyester powder coat.

Lightolier a Genlyte Thomas Companywww.lightolier.com Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902