Lighting Systems EC1-12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 1 of 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Energos Control System 2-Light T5 per 4' (121.92cm) (Nominal) Lens

Feature Specifications – Energos Control System (For standard Energos fixtures consult appropriate EG spec sheets)

Feature Specifications

Electrical

Dedicated low voltage (24 VDC) circuit controls the Energos Control Systems. The line voltage circuits control all the standard ballast functions including A/B switch- ing, Dimming and Emergency Battery Pack operations.

Occupancy Sensors:

Time delay is factory pre-set to 30 minutes.

Time delay can be field adjusted from 30 minutes to a minimum of 30 seconds.

Daylight hold-off is factory pre-set to 120 ft-candles (1291.67m-candles).

Daylight hold-off is field adjustable from 120 ft-candles (1291.67m-candles) down to 10 ft-candles (107.64m-candles).

Sensors are designed for a detection area (sensitivity diameter) of 16' (487.68cm) when suspended 10' (304.80cm) AFF. Lowering the sensor produces a smaller area of detection. See chart and diagram for additional information.

1. End Cap Sensor Mounting

2. Mid-mounted 8' (243.84cm)

 

Sensor Mounting

ECS occupancy sensors are available in two variations:

Mounted in the end cap.

The middle of an 8" (243.84cm) module.

The ECS system control-center is the Power Pack. The Power Pack, contained in each Master Module, interrupts the circuits when parameters dictate. The Power Pack can control up to 600 watts 120 VAC, and 1300 watts 277 VAC. A maximum of 10 sensors can be used on a single Power Pack. There is no limitation to the number of Power Packs that can be "daisy-chained" to a single ECS circuit.

Emergency battery packs can be used in conjunction with ECS for emergency egress lighting since all listed packs operate for a minimum of 90 minutes. EM Packs can be used as momentary lighting for emergency circuit for power transitions, and smaller packs are recommended for this purpose.

Coverage Diameter

16' 0" 14' 5" 12' 10" 11' 3"

Sensor Height AFF

7' 0"

8' 0"

9' 0"

10' 0"

Dimming ballasts can be used in conjunction with ECS. However, the control system will only perform ON or OFF operations and will not affect the level of dim- ming set by the dimming ballasts.

Factory installed ballast disconnect allows the ballast to be disconnected from and reconnected to incoming power under load without turning the entire circuit off.

Serial Row Linking (SRL) provides multiple continuous row communication. For every run that SRL is required, order the appropriate SRL end set from page 2 of this Specification Sheet. Consult Energos Application Guide for more detailed definitions and examples.

Mountings

Cable suspension distances are on 48" (121.92cm) and 96" (243.84cm) centers, and consist of a 4 1/2" (11.43cm) diameter canopy finished white enamel. A 1/16" (0.16cm) diameter stainless steel aircraft cable accomplishes suspension and is adjustable from 12" (30.48cm) to 36" (91.44cm). Power feeds are 18 gauge silver braided cord with clear jacket.

Energos Occupancy Sensor

Coverage Zone Chart

Height of Sensor

Broadcast Diameter

Task Diameter

10' 0" (304.80cm)

 

16' 0" (487.68cm)

8' 0" (243.84cm)

9' 0" (274.32cm)

 

14' 5" (427.99cm)

7' 3" (214.12cm)

8' 0" (243.84cm)

 

12' 10" (391.16cm)

6' 5" (184.15cm)

7' 0" (213.36cm)

 

11' 3" (336.04cm)

5' 7" (154.18cm)

 

 

 

 

Job Information

 

Type:

 

Job Name:

Cat. No.:

Lamp(s):

Notes:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group • C0808

Page 1
Image 1
Lightolier EC1-12 specifications Feature Specifications Electrical, Coverage Diameter, Mountings

EC1-12 specifications

The Lightolier EC1-12 is a cutting-edge lighting fixture that combines elegance with advanced technology to provide optimal illumination for various settings. Designed with versatility in mind, the EC1-12 is suitable for both residential and commercial applications, making it an ideal choice for modern interiors.

One of the main features of the Lightolier EC1-12 is its sleek, minimalist design. The fixture’s clean lines and unobtrusive aesthetic allow it to blend seamlessly into any decor, ensuring that it enhances rather than detracts from the visual appeal of the space. Available in various finishes, including matte white and brushed aluminum, the EC1-12 caters to diverse styles, from contemporary to transitional.

The EC1-12 is equipped with advanced LED technology, providing significant energy savings and a longer lifespan compared to traditional lighting options. With an integrated LED module, the fixture boasts an impressive lumen output while consuming minimal wattage. This combination of high efficiency and low energy consumption makes it an eco-friendly choice, contributing to reduced energy bills and a smaller carbon footprint.

Another notable characteristic of the EC1-12 is its adjustable features. The fixture typically offers a 360-degree rotation and a tilting capability that allows users to direct light exactly where it is needed. This adjustable functionality is particularly useful in settings where task lighting is crucial, such as in art galleries, retail spaces, or home offices.

The Lightolier EC1-12 also incorporates advanced dimming capabilities, allowing users to create the perfect ambiance for any occasion. With compatible dimmers, users can effortlessly adjust brightness levels to achieve the desired atmosphere, whether it's for a cozy dinner party or a focused work session.

In addition to its impressive performance and aesthetic appeal, the EC1-12 prioritizes user satisfaction with easy installation features. The fixture is designed to fit into standard ceiling configurations, simplifying the setup process for both professional electricians and DIY enthusiasts.

In summary, the Lightolier EC1-12 is a versatile, energy-efficient lighting solution that excels in design, performance, and adaptability. With its advanced LED technology, adjustable features, and aesthetic versatility, it stands out in the realm of modern lighting solutions, making it an excellent choice for enhancing the beauty and functionality of any space.