Lighting Systems EC1-3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 1 of 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Energos Control System 3-Light T8 per 4' (121.92cm) (Nominal) Louver

Feature Specifications – Energos Control System (For standard Energos fixtures consult appropriate EG spec sheets)

Feature Specifications

Electrical

Dedicated low voltage (24 VDC) circuit controls the Energos Control Systems. The line voltage circuits control all the standard ballast functions including A/B switch- ing, Dimming and Emergency Battery Pack operations.

Occupancy Sensors:

Time delay is factory pre-set to 30 minutes.

Time delay can be field adjusted from 30 minutes to a minimum of 30 seconds.

Daylight hold-off is factory pre-set to 120 ft-candles (1291.67m-candles).

Daylight hold-off is field adjustable from 120 ft-candles (1291.67m-candles) down to 10 ft-candles (107.64m-candles).

Sensors are designed for a detection area (sensitivity diameter) of 16' (487.68cm) when suspended 10' (304.80cm) AFF. Lowering the sensor produces a smaller area of detection. See chart and diagram for additional information.

1. End Cap Sensor Mounting

2. Mid-mounted 8' (243.84cm)

 

Sensor Mounting

ECS occupancy sensors are available in two variations:

Mounted in the end cap.

The middle of an 8" (243.84cm) module.

The ECS system control-center is the Power Pack. The Power Pack, contained in each Master Module, interrupts the circuits when parameters dictate. The Power Pack can control up to 600 watts 120 VAC, and 1300 watts 277 VAC. A maximum of 10 sensors can be used on a single Power Pack. There is no limitation to the number of Power Packs that can be "daisy-chained" to a single ECS circuit.

Emergency battery packs can be used in conjunction with ECS for emergency egress lighting since all listed packs operate for a minimum of 90 minutes. EM Packs can be used as momentary lighting for emergency circuit for power transitions, and smaller packs are recommended for this purpose.

Coverage Diameter

16' 0" 14' 5" 12' 10" 11' 3"

Sensor Height AFF

7' 0"

8' 0"

9' 0"

10' 0"

Dimming ballasts can be used in conjunction with ECS. However, the control system will only perform ON or OFF operations and will not affect the level of dim- ming set by the dimming ballasts.

Factory installed ballast disconnect allows the ballast to be disconnected from and reconnected to incoming power under load without turning the entire circuit off.

Serial Row Linking (SRL) provides multiple continuous row communication. For every run that SRL is required, order the appropriate SRL end set from page 2 of this Specification Sheet. Consult Energos Application Guide for more detailed definitions and examples.

Mountings

Cable suspension distances are on 48" (121.92cm) and 96" (243.84cm) centers, and consist of a 4 1/2" (11.43cm) diameter canopy finished white enamel. A 1/16" (0.16cm) diameter stainless steel aircraft cable accomplishes suspension and is adjustable from 12" (30.48cm) to 36" (91.44cm). Power feeds are 18 gauge silver braided cord with clear jacket.

Energos Occupancy Sensor

Coverage Zone Chart

Height of Sensor

Broadcast Diameter

Task Diameter

10' 0" (304.80cm)

16' 0" (487.68cm)

8' 0" (243.84cm)

9' 0" (274.32cm)

14' 5" (427.99cm)

7' 3" (214.12cm)

8' 0" (243.84cm)

12' 10" (391.16cm)

6' 5" (184.15cm)

7' 0" (213.36cm)

11' 3" (336.04cm)

5' 7" (154.18cm)

Job Information

Type:

Job Name:

 

Cat. No.:

 

Lamp(s):

 

Notes:

 

 

 

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group • C0808

Page 1
Image 1
Lightolier EC1-3 specifications Feature Specifications Electrical, Coverage Diameter, Mountings, Occupancy Sensors

EC1-3 specifications

The Lightolier EC1-3 is a state-of-the-art lighting solution that combines modern technology with functional design to enhance various environments. This versatile fixture is well-suited for both residential and commercial applications, making it an ideal choice for architects, designers, and homeowners looking for an efficient yet aesthetically pleasing lighting option.

One of the standout features of the Lightolier EC1-3 is its energy efficiency. Utilizing LED technology, this fixture ensures substantial energy savings compared to traditional incandescent or fluorescent lighting. With a prolonged lifespan, LEDs reduce the need for frequent replacements, ultimately lowering maintenance costs and environmental impact.

The EC1-3’s design is characterized by its slim profile and contemporary aesthetic, allowing it to seamlessly blend into any setting. It is available in various finishes, providing flexibility to match different interior styles. The fixture is designed for easy installation, featuring a user-friendly mounting system which simplifies the process for both professionals and DIY enthusiasts.

In terms of output, the EC1-3 is equipped with adjustable lumens, enabling users to customize the lighting intensity to fit specific needs. This feature is particularly beneficial in areas with varying light requirements, such as hallways, workspaces, or reading nooks. Additionally, the fixture includes dimming capabilities, giving users greater control over the ambiance of their environment.

Another advanced characteristic of the Lightolier EC1-3 is its compatibility with smart home technology. Users can integrate the fixture with existing smart systems, allowing for remote control and scheduling via mobile devices or voice commands. This technological integration not only enhances convenience but also allows for energy monitoring, leading to further savings.

Furthermore, the EC1-3 is designed with an emphasis on sustainability. The materials used in its construction are eco-friendly, and its energy-efficient operation aligns with current trends toward greener living spaces. The fixture meets various industry standards for safety and performance, ensuring reliable operation in a variety of applications.

In summary, the Lightolier EC1-3 is an exceptional lighting fixture that emphasizes energy efficiency, stylish design, and advanced technology. Its customizable features and smart compatibility make it a preferred choice for those looking to illuminate their spaces effectively while being mindful of energy consumption and environmental impact. Whether for home or business, the EC1-3 promises to deliver both functionality and elegance.