StarTech.com CTK400LAN Features, Specifications, Operating Instruction, Overview, Getting Started

1

Overview

The StarTech.com REMOTETEST cable tester is a palm-sized unit with four kinds of connectors: RJ45, RJ11, USB and BNC, for the testing of today’s most popular media. This unit can be used to verify the condition of cables, both before and after their installation. The separable passive module is connected to the remote end of the installed network cabling.

The tester also offers easy operating; the user begins by testing by simply pushing a button. Multiple LEDs give a clear indication of testing status and go off automatically, to maximize power saving.

Features

•Detachable module for testing two remote points

•Open/Short wiring testing

•Connected wires display

•Ethernet 10Base2/10Base5 termination value detector

•No wire or termination indicator

•Wrong connection/Non-parallel connection

Specifications

Indicators	Battery Good/Battery Low
	(Green/Yellow)
	No Connection/No Terminator LED
	(Yellow)
	Non-Parallel/50 Ohm LED (Yellow)
	Connected/25 Ohm LED (yellow)
	Short LED (Red)
	S, C/a, 2, 3, 4, 5, 6, 7, 8 LEDs (Yellow)
Connectors	RJ45 x 2, RJ11 x 2, USB A x 1, USB B x 1,
	BNC x 1
Cable Length	200m for all connectors
Power	9V Alkeline battery
Size	145 x 86 x 26 mm (5.7 x 3.39 x 1.03")
Weight	185g (6.53 oz)

Getting Started

Operating Instruction

To test the cable not installed (RJ45, RJ11, USB, and BNC):

1.Connect one end of the cable to the master’s proper connector, and the other end to the remote module.

2.Press the test button.

3.When the LEDs stop flashing the result is ready to be read.