Lighting Systems EC1-7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 1 of 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Energos Control System 3-Light T5 per 4' (121.92cm) (Nominal) Louver

Feature Specifications – Energos Control System (For standard Energos fixtures consult appropriate EG spec sheets)

Feature Specifications

Electrical

Dedicated low voltage (24 VDC) circuit controls the Energos Control Systems. The line voltage circuits control all the standard ballast functions including A/B switch- ing, Dimming and Emergency Battery Pack operations.

Occupancy Sensors:

Time delay is factory pre-set to 30 minutes.

Time delay can be field adjusted from 30 minutes to a minimum of 30 seconds.

Daylight hold-off is factory pre-set to 120 ft-candles (1291.67m-candles).

Daylight hold-off is field adjustable from 120 ft-candles (1291.67m-candles) down to 10 ft-candles (107.64m-candles).

Sensors are designed for a detection area (sensitivity diameter) of 16' (487.68cm) when suspended 10' (304.80cm) AFF. Lowering the sensor produces a smaller area of detection. See chart and diagram for additional information.

1. End Cap Sensor Mounting

2. Mid-mounted 8' (243.84cm)

 

Sensor Mounting

ECS occupancy sensors are available in two variations:

Mounted in the end cap.

The middle of an 8" (243.84cm) module.

The ECS system control-center is the Power Pack. The Power Pack, contained in each Master Module, interrupts the circuits when parameters dictate. The Power Pack can control up to 600 watts 120 VAC, and 1300 watts 277 VAC. A maximum of 10 sensors can be used on a single Power Pack. There is no limitation to the number of Power Packs that can be "daisy-chained" to a single ECS circuit.

Emergency battery packs can be used in conjunction with ECS for emergency egress lighting since all listed packs operate for a minimum of 90 minutes. EM Packs can be used as momentary lighting for emergency circuit for power transitions, and smaller packs are recommended for this purpose.

Coverage Diameter

16' 0" 14' 5" 12' 10" 11' 3"

Sensor Height AFF

7' 0"

8' 0"

9' 0"

10' 0"

Dimming ballasts can be used in conjunction with ECS. However, the control system will only perform ON or OFF operations and will not affect the level of dim- ming set by the dimming ballasts.

Factory installed ballast disconnect allows the ballast to be disconnected from and reconnected to incoming power under load without turning the entire circuit off.

Serial Row Linking (SRL) provides multiple continuous row communication. For every run that SRL is required, order the appropriate SRL end set from page 2 of this Specification Sheet. Consult Energos Application Guide for more detailed definitions and examples.

Mountings

Cable suspension distances are on 48" (121.92cm) and 96" (243.84cm) centers, and consist of a 4 1/2" (11.43cm) diameter canopy finished white enamel. A 1/16" (0.16cm) diameter stainless steel aircraft cable accomplishes suspension and is adjustable from 12" (30.48cm) to 36" (91.44cm). Power feeds are 18 gauge silver braided cord with clear jacket.

Energos Occupancy Sensor

Coverage Zone Chart

Height of Sensor

Broadcast Diameter

Task Diameter

10' 0" (304.80cm)

 

16' 0" (487.68cm)

8' 0" (243.84cm)

9' 0" (274.32cm)

 

14' 5" (427.99cm)

7' 3" (214.12cm)

8' 0" (243.84cm)

 

12' 10" (391.16cm)

6' 5" (184.15cm)

7' 0" (213.36cm)

 

11' 3" (336.04cm)

5' 7" (154.18cm)

 

 

 

 

Job Information

 

Type:

 

Job Name:

Cat. No.:

Lamp(s):

Notes:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group • C0808

Page 1
Image 1
Lightolier EC1-7 specifications Feature Specifications Electrical, Coverage Diameter, Mountings

EC1-7 specifications

Lightolier EC1-7 is a notable piece of lighting technology that has garnered attention for its exceptional performance and innovative features, making it a preferred choice for both commercial and residential applications. This robust lighting solution is particularly recognized for its efficiency, versatility, and aesthetic appeal.

One of the main features of the Lightolier EC1-7 is its energy-efficient design. Utilizing advanced LED technology, this product significantly reduces energy consumption compared to traditional lighting solutions. The EC1-7 maintains a high lumen output while consuming minimal wattage, contributing to lower electricity bills and a reduced carbon footprint. This is particularly advantageous for organizations and individuals aiming to practice sustainability in their lighting choices.

Another defining characteristic of the EC1-7 is its customizable design. The fixture is available in various sizes and finishes, allowing it to seamlessly integrate into diverse environments. Architects and designers appreciate the range of options, enabling them to create interiors that are not only functional but also visually striking. With its sleek lines and discreet profile, the EC1-7 complements modern aesthetics while delivering high-quality illumination.

The EC1-7 also features advanced control technologies, making it adaptable for various lighting scenarios. It supports dimming capabilities, allowing users to adjust the brightness according to their needs. This flexibility fosters a dynamic ambiance, suitable for different activities, whether in a workplace, retail setting, or home. Additionally, the EC1-7 can be integrated into smart lighting systems, increasing its usability through programmable features and remote control access.

Durability is another critical aspect of the EC1-7. Designed with high-quality materials, the fixture provides long-lasting performance, reducing the need for frequent replacements. Its resilience against environmental factors makes it suitable for both indoor and outdoor applications.

Overall, the Lightolier EC1-7 stands out as a leader in modern lighting solutions due to its energy efficiency, customization options, advanced control features, and durability. Whether for enhancing the ambiance of a living space or creating a productive work environment, the EC1-7 exemplifies the perfect balance between functionality and style, appealing to a broad range of users and applications.