|
|
|
|
| Tangent™ Track Lighting System FX | |||
|
|
|
|
|
|
|
|
|
Page | of 3 |
|
|
|
|
|
|
|
|
|
|
| 47 5/8 in [1210 mm] |
| FX04 | ||
3/16 in |
|
|
| 95 5/8 in [2489 mm] | 3/16 in | FX08 | ||
[4.8 mm] |
|
|
| 143 5/8 in [3648 mm] | [4.8 mm] | |||
|
|
| FX12 | |||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| FX25 | |
|
|
|
|
|
|
| FX61 | |
5 |
|
|
|
|
| 5 | FX48 | |
|
|
|
|
| FX52 | |||
|
|
|
|
|
| 4 | ||
|
|
|
|
|
| FX53 | ||
|
|
|
|
|
|
| ||
|
|
| 3/8 in [9 mm] |
|
| FX53 | ||
|
|
|
|
| FX54 | |||
|
|
|
|
|
|
| ||
|
|
| 1 |
|
| FX55 | ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| FX87 | |
|
|
|
|
| 3/4 in [19 mm] |
| FX89 | |
|
|
|
|
|
| FX100 | ||
|
|
|
|
|
|
| ||
|
|
| 3 | 3 |
|
|
| |
|
|
| 2 |
|
|
|
| |
Ordering Information |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
Catalog No. |
| Finish |
| Description |
| Track Mountings |
|
|
|
|
|
|
|
|
|
|
|
FX04 |
| Clear Anodized |
| 4' Track |
| Tangent Surface Track may be ceiling, |
|
|
FX08 |
| Clear Anodized |
| 8' Track |
|
|
| |
FX12 |
| Clear Anodized |
| 12' Track |
| Mounting anchors or clips must be placed |
|
|
FX25 |
| Clear Anodized |
| Mounting Anchors (5pk) | no more than 3’ apart for continuous |
|
| |
FX48 |
| Silver |
| Surface Power Feed |
|
|
| |
FX61, FX61WH | Silver, White |
|
| 2' apart for | ||||
FX52 |
| Silver |
| Variable Angle Connector, Mechanical only | anchor or clip should also be placed 6" from |
|
| |
FX53 |
| Silver |
| Variable Angle Connector, Electro/Mechanical | each end of the track run. Surface mount |
|
| |
FX54 |
| Silver |
| anchors and grid clips are sold separately. |
|
| ||
FX55 |
| Silver |
|
|
|
| ||
FX87 |
| Silver |
| Grid Ceiling Mount Clips, |
|
|
| |
FX89 |
| Silver |
| Grid Ceiling mount Clips, Square- Edge (5pk) |
|
|
| |
FX96, FX96WH | Silver, White |
| Grid Ceiling Feed Canopy |
|
|
| ||
FX100 |
| N/A |
| Bending Tool |
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
Tangent Surface Track is a
1.Tangent™ Track: Anodized aluminum with a clear protective coating
2.Insulating Liner: Clear polycarbonate; houses conductors
3.Conductor (2): Tin plated copper
4.Polarity Dimple: Identifies the 120V line conductor
5.End Cap: Silver painted polycarbonate
Finish
Tangent track and mounting anchors are anodized aluminum with a clear protective coating. Connectors and end caps are painted in a coordinating silver finish. All painted finishes are baked enamel.
Electrical
Capacity is 20 amps at 120 volts 60Hz per branch circuit. The track units are polarized and continuously grounded throughout. Electrical conductors are contained in the polycarbonate extrusion. Track is intended for wiring to branch circuit building wire with ground. All wiring must be in accordance with National and Local Codes.
Mechanical
Track units plug together using tangent connectors and lock securely to prevent accidental separation. Tangent™ lighting units can be attached at any point along the track, up to 3" from end of Track.
Labels
cULus; Patent Pending
Job Information | Type: |
|
|
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508)
© 2007 Genlyte Group LLC • D0907