Lightolier Page of, Track Mounting and Power Feed Systems, Type, Direct Mounting, FX61WH White

Page of 3

Track Mounting and Power Feed Systems

Surface Mount Anchors Attach to track at any point. Provided with toggle bolts and a 3/4" “goof” washer. Secured to track with integral set screw. Track and Surface Mount Anchors sold separately.

FX25 Clear Anodized (Pack of 5)

Direct Mounting

Toggle bolts and a 3/4" “goof” washer are furnished with the Surface Mount Anchors. Surface mount anchors may also be attached directly to surface using other suitable hardware. Top of the track sits 5/16” below the mounting surface.

For continuous runs, surface mount anchors should	5/16 in
be placed no more than 3' apart if ceiling
	[8mm]
mounted and 2' apart if wall mounted.
Additionally, surface mount anchors
should be placed 6" from each
end of the track run.

For individual track installations, use 3 anchors for a 4'; 4 anchors for an 8'; and 5 anchors for a 12'.

Surface Power Feed

Mounts to a 3/8" NM (non-metallic) or armoured cable connector. Mounts anywhere along track. Max load 20 amps @ 120V, 60Hz

FX48 Silver

J-Box Feed Canopy Kit Mounts anywhere along track for power feed from a 4” octagonal outlet box. Max load 20 amps @ 120V, 60Hz

FX61 Silver

FX61WH White

Tangent™ Track Lighting System  FX

Grid Ceiling Mounting Clips

For Square Edge Panels and 9/16”-15/16” T-Bars.Mounts onto

T-Bar by rotating clip. Secures to track with integral set screw.

			2 3/8 in
			[61 mm]
		3/4 in
		[19 mm]
			1 in
			[25 mm]
			Grid Clip Detail
	T-Runner		3/8 in
	Square		[9 mm]
	Edge Panel		7/8 in
	9/16 - 15/16 in	1/4 in
FX89			[24 mm]
	Silver (Pack of 5)	[7mm]

For Regressed Edge Panels and 9/16”-15/16” T-Bars.

Mounts onto T-Bar by rotating clip. Secures to track with integral set screw.

3/8 in [9 mm]

1 1/8 in

[29 mm]

	T-Runner
	Regressed
	Edge Panel
9/16 in
15/16 in	5/16 in
	13/32 in

FX87 Silver (Pack of 5)

Job Information	Type:
Lightolier a Genlyte company	www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2007 Genlyte Group LLC • D0907