/INSTRUCTION SHEET NO
INSTALLATION OF LOUVER ACCESSORY FOR
0487
NOTE: This accessory is intended for specific Lightolier
~e~
1.Disconnect power and allow lamp to cool before installing LOUVER accessory.
2.Remove lamp assembly, referencing the specific
fixture instructions for Iamping and relamping. | ~u |
3.Remove the LAMP and GLASS LAMP GUARD.
4.Place the LOUVER into the lamp assembly (Figs.l,2,3). Note: when used with ribbed type lamp assemblies, place the louver so that it seats in the assembly, flush with the RIBS (Figs. 4,5,6).
FIG. 1 (FIXT. 6286,6287)
GLASS LAMP GUARD
@4
FIG. 2 (FIXT. 6298,6299)
LAMP
5. Replace the GLASS LAMP GUARD and LAMP
WARNING
LAMP MANUFACTURERS REQUIRE A GLASS LAMP GUARD BE IN PLACE BEFORE ENERGIZING LAMP AND THAT GREAT CARE SHOULD BE TAKEN THAT LAMP IS FULLY COOLED BEFORE RELAMPING.
LOUVER
FIG. 3
6.Replace lamp assembly as instructed on individual fixture instruction sheet.
‘“SS”MPG”ARFIG. 4
(FIXT. 6296,6297)
LOUVER
RIB
FIG. 6
*NOTE: l%r fixtures 6420, 6421, it is necessay to loosen two springs to insert louver.
[ml<>[-[~<>[-[[~l?
RIB
FIG. 5
(FIXT. 6420,6421)
B SE CAUCUS NEW JERSEY, 07094.050
MONTRE&UEB EC, CANADi