Lightolier MD2G2SB dimensions Page 3 of, Nurses Night Light Optional, Options

MD*4TM 2' x 2' Recessed or Surface MD2G2SB

Page 3 of 4 Multi-Function Patient Lighting

Nurses Night Light (Optional)

Lights night stand between beds.

Field adjustable for either right or left side of patient's bed.

No glare to any patient.

Wired for independent switching.

CAN BE SET TO

LEFT OR RIGHT

SIDE OF BED

Options

120V medium base narrow spot,

50W reflector lamp

Specular anodized aluminum mirror, adjusts to left or right side of bed

Nurse's night light. Suffix: NL

Night Light: 12V, 3 watt, cool white LED (50,000	Pillow speaker (by others)
hours life) (supplied with fixture). Suffix: LD

Sequential Switch. Suffix: SW

MD*4’s optional low voltage (1-3 volts) sequential switch mounted in the fixture is listed in com- pliance with UL 544 for medical and dental equipment. Two red wires coming from the fixture can be wired to a wall receptacle (by others) for use with that manufacturers pillow speaker. The pil- low speaker is used to control the television, call the nurse and control the lighting. To control the lighting it should be specified to have a normally open contact switch.

Pressing this switch on the pillow speaker the first time, turns the ambient light on; pressed a second time, turns the reading light on and the ambient light off; pressed a third time, turns both the ambient and reading lights on; pressed a fourth time turns both lights off. Pressing the button again repeats the cycle.

Should the patient's bed be rolled away from the wall, the pillow speaker will simply pull free from the wall receptacle avoiding any damage.