Lightolier MDCG2BX Page 4 of, Ordering Information, Options & Accessories, Specifications, Type

SECTION 8/Folio R40-22

	MD*COFFER MDCG2BX
Page 4 of 4	2'x2' RECESSED OR SURFACE, MULTI-FUNCTION PATIENT LIGHTING
	INDIRECT AMBIENT LIGHT WITH PERFORATED MESH SHIELD

ORDERING INFORMATION

Explanation of Catalog Number. Example: MDCG2BX120SW

MDC

MD*C

Recessed or

Surface,

Multi-function

Patient Light

with Perforated

Mesh Shield

G

CEILING

TYPE:

Same Unit

May Be Used

For: Grid (lay-in)

Or: Surface

Mounted

2

	BALLAST TYPE:				OPTIONS:
					Add
	(Ambient Reading)
					appropriate
		20THD	10THD
					suffix to
	1 or 2 Lamp Mag.	BX*	—
					catalog no., ie:
	1-2 Lamp Elec.	SB*	IB*		SW.
	*Instant Start Standard
LAMP				VOLTAGE:
QUANTITY:				120 or 277+
(Ambient/
Reading)
2 Lamps
(Total)

*Consult factory for 277 volt.

OPTIONS & ACCESSORIES

ACCESS PLATES: Top wiring access plate is shipped with fixture as standard. When access plates are required in advance for wiring conve- nience, specify separately. Catalog Number: ACP.

DRYWALL KIT: Order Catalog Number: FK92X2. Request Folio OA30-10.

ELECTRONIC SEQUENTIAL SWITCH (Low Voltage): Switch factory mounted in fixture for ambient and reading light convenience (con- trolled by pillow switch, by others). SUFFIX: SW.

INDIVIDUAL SWITCHING (Low Voltage): Switches mounted to patients bed for use with manufacturers control

system (such as Hill-Rom Side Com System). SUFFIX: DP.

9/7 WATT NIGHT LIGHT: SUFFIX: PL (Lamp not included).

FUSING: Internal fast-blow fusing. SUFFIX: GLR. Internal slow-blow fusing. SUFFIX: GMF.

RADIO INTERFERENCE FILTER: 120 or 277 volt, 50 or 60 Hz. One per

fixture is standard. SUFFIX: RF.

GERM SHIELD. Order Catalog Number: MD4CLGS22.

ELECTRICAL/WIRING OPTIONS: Consult factory.

SPECIFICATIONS

MATERIALS: Chassis parts are die-formed 20 gauge steel. Reading light – low iridescence anodized 95% reflective, semi- specular reflector. Ambient light – flat white acrylic contoured steel reflector and perforated steel mesh shield with white acrylic overlay. FINISH: Cavity (reading/ambient lights) — flat white acrylic interi- or, minimum reflectance 86%. Phosphate undercoating. Chassis exterior — white baked acrylic enamel.

ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

LABELS: I.B.E.W. UL and ULc Listed.

Job Information	Type:
Lightolier a Genlyte Thomas Company		www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division)

A0902