Lightolier V611 instruction sheet A.Frame-Inand Wire-Infig, Is, A-Lampwall Washeridownlight, W612

		INSTRUCTION	SHEET NO.
A-LAMP WALL WASHERIDOWNLIGHT		IS:V611
IN=ALLATION OF PRE-WIRED CALCULITE FRAME4N-KITS
INSTRUCTION SHE~ FOR ITEMS		R0291	Page 1 of 2
V611,	W612

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE.

This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.

Retain these Instructions for maintenance reference.

DO

WARNING—(RISK OF FIREIDO NOT INSTALL InSUlatiOn WITHIN 3 INCHES OF FIXTURE SIDES OR

WIRING COMPARTMENT, NOR ABOVE FIXTURE IN SUCH A MANNER SO AS TO ENTRAP HEAT.

N~E RELIXTOR/HOUSING must be Installed before closlng in ceiling. Make sum flnlshed ceiling Is lined up with MOUNTING FRAME (Fig. 6).

A.FRAME-IN AND WIRE-IN (FIG. 1)

1.Install FRAME-IN SECTION using ADJUSTABLE MOUNTING BRACKET (see below).

Wire to supply leads. White fixture lead to neutral supply lead. Black fixture lead to hot (120V.) supply lead. Bare fixture wire to supply ground. Use wirenuts (local hardware items). Place all electrical connections in the J-BOX. Attach J-BOX COVER onto J-BOX.

s

[m I <>~”[~<> 1-[ 1= [~” :&;~;;;;,N;~E&;~,E;~;y~~