Lightolier VL Series Page 2 of, 4-3/4Wide, 24, 36 or 48 Lengths 1 Lamp T8, Specifications, Type

Section 4/Folio I50-10

Vanity Light VL Series

Page 2 of 2

Chassis

Model No. SN4S132HPFUNVHI

with shielding VLW4X48

LER = FP - 68.2 IW - 29.6 BF - 0.92 Comparative yearly lighting energy cost per

1000 lumens = $3.52

Report Number: G2005214

Lamp: F32/T8 TL841

Luminaire: 4' Vanity Light, with 4-3/4" wide milk white acrylic lens

Ballast: 1X32/T8

Report is based on 2850 Lumens per lamp. Efficiency: 76.6%

CIE Type-Direct-Indirect
Plane:					0-Deg			90-Deg
Spacing Criteria:						1.2			1.4
Shielding Angles:						90			90
COEFFICIENTS OF UTILIZATION –
ZONAL CAVITY METHOD. EFFECTIVE
FLOOR CAVITY REFLECTANCE 0.200
RC		80			50			30
RW	70	50	30	50	30	10	50	30	10
01	78	73	69	64	61	58	58	56	54
02	70	63	57	55	50	46	50	46	43
03	63	54	48	47	42	38	43	39	36
04	58	48	41	42	36	32	38	34	30
05	53	42	35	37	32	27	34	29	26
06	49	38	31	33	28	24	31	26	22
07	45	34	27	30	25	21	28	23	20
08	42	31	25	28	22	18	26	21	17
09	39	28	22	25	20	16	23	19	16
10	36	26	20	23	18	15	22	17	14

LUMINANCE DATA IN CANDELA/SQ. METER

AVERAGE AVERAGE AVERAGE AVERAGE

IN DEG.	0-DEG. 45-DEG. 90-DEG.
45	2586.	2180.	1922.
55	2382.	2035.	1793.
65	02058.	1903.	1697.
75	01478.	1819.	1629.
85	0496.	1822.	1605.

4-3/4" Wide, 24", 36" or 48" Lengths

1 Lamp T8

CANDELA DISTRIBUTION0
	0.0	45.0	90.0	FLUX
0	475	475	475
5	470	474	478	45
15	452	459	467	130
25	418	432	446	200
35	370	394	418	247
45	310	349	385	269
55	239	299	347	265
65	160	246	307	238
75	78	196	265	196
85	13	151	224	151
90	4	132	204
95	4	118	188	119
105	6	91	153	92
115	18	73	122	71
125	24	61	97	53
135	28	49	77	40
145	36	37	55	27
155	44	55	42	21
165	51	35	54	12
175	55	35	39	4
180	53	53	53

ZONAL LUMEN SUMMARY

ZONE	LUMENS	% LAMP	% FIXT
00-030	375	13.2	17.2
00-040	622	21.8	28.5
00-060	1157	40.6	53.0
00-090	1743	61.2	79.9
90-120	282	9.9	12.9
90-130	335	11.7	15.3
90-150	403	14.1	18.4
90-180	440	15.4	20.1
00-180	2183	76.6	100.0

Ordering Information

NOTE: Chassis and shielding are packed in separate cartons. When ordering, enter as separate line items.

Length	Shielding	Chassis	Lamp	Ballast	20THD	10THD
2'	VLW4X24	SN2S117HPFUNVHI	1-T8	1 Lamp Elec. T8	–	HI
3'	VLW4X36	SN3S125HPFUNVHI	1-T8	1 Lamp Elec. T8	–	HI
4'	VLW4X48	SN4S132HPFUNVHI	1-T8	1 Lamp Elec. T8	–	HI

NOTE: UNV =120-277.

NOTE: Chassis and shielding shown are stock items. For other ballast options see Folio H110-40.

Specifications

Materials: Chassis parts are die-formed heavy gauge code cold rolled steel, 1-13/16" deep, 2-1/2" wide.

Ballast Cover: Code gauge steel secured with 1/4 turn fasteners, for easy wireway access.

Finish: Chassis exterior–exterior phosphate undercoating, baked white polyester enamel.

Lens: 4-3/4" diameter opal white acrylic with permanently installed opal white opaque diffuser ends with decorative trim..

Electrical: Thermally protected class “P” ballast, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

Labels: I.B.E.W./UL and ULc Listed.

Job Information	Type:
Lightolier a Genlyte company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2005 a Genlyte company A0902