Lightolier WES SERIES 1X4 Photometry, Ordering Information, Options & Accessories, Specifications

SECTION 6/Folio N30-10

	CLEANGUARD WET LOCATION WES SERIES 1X4
Page 2 of 2	1' x 4' RECESSED FLUORESCENT, FOR WET LOCATIONS, COVERED CEILING USE
	1 OR 2 LAMPS, T8 OR T12

PHOTOMETRY

MODEL NO. WES1GFSVA232				LER = FL - 48.3			IW - 80.0		BF - 0.95
				Comparative yearly lighting energy cost per 1000 lumens = $5.00
		coefficients of utilization — zonal cavity method
			RF		20					20					20
			RC		80					50					30
			RW	70	50		30		50	30	10			50	30	10
			1	71	68		66		64	62	61			61	60	59
		ratio	2	65	61		57		57	55	52			55	53	51
			3	60	55		50		52	48	45			50	47	45
		cavity	4	56	49		44		47	43	40			45	42	39
			5	51	44		39		42	38	35			41	37	34
		room	6	48	40		35		38	34	31			37	33	30
			7	44	36		31		35	30	27			34	30	27
			8	41	32		27		31	27	24			30	26	23
			9	37	29		24		28	24	21			27	23	20
			10	35	27		22		26	21	18			25	21	18
		visual comfort probability (VCP) average 100 fc; reflectances 80/50/20
			room size				ceiling height						ceiling height
		W		L		8.5	10.0	13.0	16.0			8.5	10.0	13.0	16.0
	20			20		60	64	70	77			61	65	70	76
	20			30		51	56	61	67			54	57	62	68
	20			40		47	50	55	60			51	53	57	61
		20		60		43	46	59	54			49	50	52	56
	30			20		62	66	70	75			63	67	70	75
	30			30		53	57	61	65			55	58	62	66
	30			40		48	51	54	58			51	53	56	60
	30			60		44	46	48	52			49	50	51	54
		30		80	lengthwise	42	44	44	48		crosswise	48	49	49	51
	40			40		49	52	55	59			53	54	57	60
	40			20		64	68	72	75			64	68	72	75
	40			30	luminaries	55	59	63	66		luminaries	57	60	63	66
	40			60		45	47	49	52			50	51	51	54
	40			80		43	45	45	48			49	50	49	50
		40		100		42	43	43	45			50	49	48	49
	60			30		57	60	64	67			58	61	64	67
	60			40		51	53	56	60			54	55	57	60
	60			60		46	48	49	52			50	51	51	54
	60			80		44	45	45	48			49	50	49	50
		60		100		43	43	42	45			50	49	47	48
	100			40		55	57	59	62			57	58	59	63
	100			60		50	51	52	55			53	54	53	56
	100			80		47	48	47	50			52	52	50	52
		100		100		46	46	44	46			52	51	49	49

ORDERING INFORMATION

Explanation of Catalog Number. Example: WES1GFSVA232120SOGLR

WE

CLEANGUARD

WET

LOCATION

S

STATIC

1

FIXTURE

WIDTH

				LENS FRAME:
CEILING		TYPE:	FS= Flat steel
G= Grid				frame
	(lay-in T bar)		FA=Flat aluminum
F=Flanged				frame
(overlap)			RA=Regressed alu
	Z spline and			minum frame

plaster frame

LENS/

SHIELDING

TYPE:

VA=Virgin acrylic (standard), see options and consult factory

LAMP

QUANTITY: 1 or 2 Lamps

LAMP/

FIXTURE LENGTH: 32=T8 34=T12

(Nominal 48")

VOLTAGE:				OPTIONS:
120 or 277			Add appropriate
			suffix to catalog
				no., ie: (GLR)
	BALLAST TYPE:
2	Lamp Mag. T12	LE
		<20THD	<10THD
2	Lamp Elec. T8	SO*		HI*
LOL T8 Dimming		PS		–

*Instant Start Standard

Other dimming options. Consult factory.

OPTIONS & ACCESSORIES

SPECIAL LENSES: Substitute VI for VA (standard) .125" nominal pattern 12 with 6.8 oz. average weight per square foot.

ACCESS PLATE: Top wiring access plate is shipped with fixture as standard. When access plates are required in advance for wiring convenience, specify separately. Order Catalog Number: ACP CSP.

CONTINUOUS ROW INSTALLATION: For F type fixtures, half-width flanges

are required between fixtures. Order Catalog Number: 1FC TRIM (each joint).

PLASTER FRAMES: F type fixtures do not include plaster frames. For individ- ual or continuous mounting, specify PF14 universal frame per fixture. ELECTRICAL/WIRING OPTIONS: Consult factory.

SEISMIC HOLD-DOWN CLIP: For type G troffers. SUFFIX: 2HD.

FUSING: Internal fast-blow fusing. SUFFIX: GLR. Internal slow-blow fusing. SUFFIX: GMF.

RADIO INTERFERENCE FILTER 120 or 277 volt, 50 or 60 Hz. One per fixture is standard. SUFFIX: RF.

DRYWALL KIT: Order Catalog Number: FK91X4. Request Folio OA30-10.

CHICAGO PLENUM: SUFFIX: CP.

SPECIFICATIONS

PERFORMANCE: In an installation of 2 lamp 32W luminaires in a room cavity ratio of 1, with reflectance of 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .68. To prevent glare the VCP shall not be less than 46 either length-

wise or crosswise (at 100fc level) and the average brightness at 65° shall not exceed 682 footlamberts. To control veiling reflections, luminaire output in the 30°-90° zone shall not be less than 66.4%.

MATERIALS: Chassis parts are die-formed code gauge cold rolled steel. Housing is contoured for rigidity with all edges turned up for safe handling. Lens frame—(FS) flat full-size steel frame, (FA) flat full-size extruded

aluminum frame, (RA) regressed full-size extruded aluminum frame. FINISH: Chassis exterior—black baked polyester enamel. Cavity—white baked polyester enamel minimum 86% reflectance. Phosphate undercoating. LENSES: VA (standard) extruded virgin acrylic, 3/16" square based female cones, running 45° to the panel edge, .095" nominal thickness (similar to pattern 12). ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

LABELS: I.B.E.W./UL and C-UL.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902