LightSpeed Technologies 780iR user manual LT-70LightMic Microphone/Transmitter

LT-70 LightMic™ Microphone/Transmitter:

Controls and Connections

External

Microphone

Connector

(MIC)

4	3
5	Power/
	Charge
Charging	LED
	Indicator
Connector
(CHARGER)

Microphone

Clip

1 ON/OFF

Switch

Channel

2 Select

Switch

(CH A/B)

1.ON/OFF Switch: This switch, located on the side of the LightMic, turns the unit on or off. The red triangle-shaped LED on the front of the LightMic will light when power is on.

2.Channel Select Switch (CH A/B): This switch allows for selection between Channel A or B. If you are using a single microphone/ transmitter for your system, we recommend using Channel A.

3.Power/Charge LED Indicator: This triangle-shaped LED is two- color. It glows red when the LightMic is powered on, green when charging and goes out when fully charged.

4.External Microphone Connector (MIC): Use the 3.5 mm MIC jack for the optional TK-250 headset microphone.

5.Charger Connector (CHARGER): Use the jack labeled CHARGER to connect the charging cable from the LES 780iR to the LightMic for daily battery recharging.

[9]