8 5 0 i R U s e r M a n u a l
CHARGING THE REDMIKE
1. Plug power cord into the cradle charger and then plug the AC end into an electrical outlet.
2.Ensure that the REDMIKE is turned OFF.
3.Place the REDMIKE into the cradle. The LED on the cradle will glow RED indicating charging has started. When the REDMIKE is fully charged the LED on the cradle charger will change to
GREEN.
Helpful Hint
• REDMIKE incorporates alkaline protection into the microphone design. Replacement AA NiMH batteries may only be purchased through Lightspeed Technologies (part #
•A blinking LED indicates a charging error. Be sure to use a Lightspeed rechargeable sensing battery.