Lincoln 1450-000-U, 1457-V00-B Gas Supply Pressure Recommendations, Electrical Service, Warranty

Global

Global

1400

Gas Supply Pressure Recommendations:		Recommended
		Minimum
Gas Type	Supply (Inlet) Pressure (mbar)	Gas Pipe Size
Natural	9-14”WC (2.2 kPA / 22.4 mbar - 3.5 kPa / 34.9 mbar)	2” (51 mm)
LP	11-14” WC (2.7 kPa / 27.36 mbar - 3.5 kPa / 34.9 mbar)	2” (51 mm)

*Gas supply pressures are dependent on local gas type and on all applicable local codes. Agency approved flexible connection to each oven must be minimum ¾” (19 mm) NPT and length must not exceed six (6) feet (1829 mm).

Electrical Service:

Each oven deck requires voltage, phase and hertz as indicated by model number. Neutral must be grounded at electrical service and receptacle properly polarized. Gas 120V units have a cord with NEMA 5-15 plug.

All other models have terminal block connections. It is recommended that a separate circuit breaker be provided for each oven deck.

Recommended Minimum Clearances:

Technical Drawings:

58”

(1473 mm)

81”

(2057 mm)

GAS SUPPLY

3/4” (19 mm) NPT

403/16” (1021 mm)

20” (508 mm)

Series Impinger®

Rear of oven to combustible surface: 6” (152 mm). Clearance on right side from other cooking equipment: 24”

(610 mm). Clearance required to remove conveyor for cleaning: 11’ (3553 mm).

Warranty:

All new impinger® ovens installed in the United States and Canada come with a one (1) year parts and labor warranty starting from the date of start-up/check-out. All ovens installed in locations other than in the US and Canada are warranted for one (1) year parts and ninety (90) days labor starting from the date of start-up/ check-out. Start-up/check-out must occur within 24 months of date of manufacture.

General Information:

			Length	Depth		Height		Height
						Single	Double Stacked
All 1600 Models
			78”	58”		52”		64 ⁵/₈”
			(1981 mm)	(1473 mm)		(1321 mm)		(1641 mm)
Model		Agency		Utility	Input Rate		Voltage	Hertz	Phase	Supply
Number
1433-000-E		NSF/CE		Natural			230	50	1	3
1450-000-U		NSF/CSA		Natural			120	60	1	3
1456-V00-B		AGA/NSF		Natural	120,000 BTU/Hr.		240	50	1	3
1434-000-E		NSF/CE		LP		32.5 kW	230	50	1	3
						126.6 MJ
1447-000-N		--		LP			220	60	1	3
1451-000-U		NSF/CSA		LP			120	60	1	3
1457-V00-B		AGA/NSF		LP			240	50	1	3
1421-000-E		NSF/CE		Electric			400/230	50	3	5
1452-000-U	NSF/UL/CSA			Electric			120/208	60	3	5
1453-000-U	NSF/UL/CSA			Electric		27 kW	120/240	60	3	5
1454-000-N	NSF/UL/CE			Electric			380Y/220	50	3	5
1455-000-N	NSF/UL/CE			Electric			415Y/240	50	3	5
1458-000-E	NSF/UL/CE			Electric			400	50	3	4

NOTE: Panel setups are added as kit numbers to the end of the model number to complete the oven order; (example: 1450-000-U-K1801 is a 1450-000-U with standard setup, left to right.)

	28”
DOOR SWING	(711 mm)

	3 1/4”
	(83 mm)	64 5/8”
48 5/8”	DOOR OPEN	(1641 mm)
(1235 mm)

21 5/8”

(549 mm)

7 1/2”

(191 mm)

20” (498 mm)

Shown with Open Glass Access Door

33 3/4”

(857 mm)

3/4” (19 mm)

NPT Gas

3 1/4”

(83 mm)

DOOR OPEN

46 1/2”

(1181 mm)

13” (330 mm)

NOTE: Specifications subject to change without notification.

I Single Belt Conveyorized Oven