i

SAFETY

i

WARNING

CALIFORNIA PROPOSITION 65 WARNINGS

Diesel engine exhaust and some of its constituents are known to the State of California to cause can- cer, birth defects, and other reproductive harm.

The Above For Diesel Engines

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

The Above For Gasoline Engines

ARC WELDING CAN BE HAZARDOUS. PROTECT YOURSELF AND OTHERS FROM POSSIBLE SERIOUS INJURY OR DEATH. KEEP CHILDREN AWAY. PACEMAKER WEARERS SHOULD CONSULT WITH THEIR DOCTOR BEFORE OPERATING.

Read and understand the following safety highlights. For additional safety information, it is strongly recommended that you purchase a copy of “Safety in Welding & Cutting - ANSI Standard Z49.1” from the American Welding Society, P.O. Box 351040, Miami, Florida 33135 or CSA Standard W117.2-1974. A Free copy of “Arc Welding Safety” booklet E205 is available from the Lincoln Electric Company, 22801 St. Clair Avenue, Cleveland, Ohio 44117-1199.

BE SURE THAT ALL INSTALLATION, OPERATION, MAINTENANCE AND REPAIR PROCEDURES ARE PERFORMED ONLY BY QUALIFIED INDIVIDUALS.

FOR ENGINE powered equipment.

1.a. Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running.

____________________________________________________

1.b.Operate engines in open, well-ventilated areas or vent the engine exhaust fumes

outdoors.

____________________________________________________

1.c. Do not add the fuel near an open flame welding arc or when the engine is running.

Stop the engine and allow it to cool before refueling to prevent spilled fuel from vaporiz- ing on contact with hot engine parts and igniting. Do not spill fuel when filling tank. If fuel is spilled, wipe it up and do not start engine until fumes have been eliminated.

____________________________________________________

1.d. Keep all equipment safety guards, covers and devices in position and in good repair.Keep hands, hair, clothing and tools away from V-belts, gears, fans and all other moving parts when starting, operating or

repairing equipment.

____________________________________________________

1.e. In some cases it may be necessary to remove safety guards to perform required maintenance. Remove guards only when necessary and replace them when the maintenance requiring their removal is complete. Always use the greatest care when working near moving parts.

___________________________________________________

1.f. Do not put your hands near the engine fan. Do not attempt to override the governor or idler by pushing on the throttle control rods while the engine is running.

___________________________________________________

1.g. To prevent accidentally starting gasoline engines while turning the engine or welding generator during maintenance work, disconnect the spark plug wires, distributor cap or magneto wire as appropriate.

1.h. To avoid scalding, do not remove the radiator pressure cap when the engine is hot.

ELECTRIC AND MAGNETIC FIELDS may be dangerous

2.a. Electric current flowing through any conductor causes localized Electric and Magnetic Fields (EMF). Welding current creates EMF fields around welding cables and welding machines

2.b. EMF fields may interfere with some pacemakers, and welders having a pacemaker should consult their physician before welding.

2.c. Exposure to EMF fields in welding may have other health effects which are now not known.

2.d. All welders should use the following procedures in order to minimize exposure to EMF fields from the welding circuit:

2.d.1. Route the electrode and work cables together - Secure them with tape when possible.

2.d.2. Never coil the electrode lead around your body.

2.d.3. Do not place your body between the electrode and work cables. If the electrode cable is on your right side, the work cable should also be on your right side.

2.d.4. Connect the work cable to the workpiece as close as possible to the area being welded.

2.d.5. Do not work next to welding power source.

Mar ‘95

Page 1 Page 3
Page 2
Image 2
Lincoln LN-742H manual Safety, California Proposition 65 Warnings
Page 1 Page 3

LN-742, LN-742H specifications

The Lincoln LN-742H and LN-742 are renowned models in the realm of industrial welding equipment, specifically designed to cater to the needs of professional welders and fabricators. These machines stand out for their robustness, advanced technology, and ease of use, making them popular choices in various industries, including construction, automotive, and manufacturing.

One of the main features of the Lincoln LN-742H and LN-742 is their powerful Arc control capabilities. The machines are equipped with innovative technology that allows for consistent arc stability, which is crucial for achieving high-quality welds. The adjustable arc force enables users to tailor the welding parameters to their specific applications, facilitating optimal penetration and minimal spatter.

The LN-742H model is particularly notable for its enhanced portable design, making it easier for operators to transport the machine to different job sites. This portability does not compromise its power, as it offers a high output suitable for both thin and thicker materials. Moreover, the LN-742 model comes with a highly efficient cooling system that ensures the machine runs smoothly without overheating, even during prolonged use.

Both models feature an intuitive user interface that simplifies the welding process. The digital display offers real-time feedback on the welding parameters, allowing welders to make precise adjustments as needed. This feature is especially beneficial for beginners, who may be unfamiliar with optimal welding settings.

Another impressive characteristic of the Lincoln LN-742H and LN-742 machines is their versatility. They support various welding processes, including MIG, TIG, and stick welding, giving users the flexibility to choose the most suitable method for their projects. This adaptability makes these models an ideal solution for shops that handle a wide range of welding tasks.

Durability is a significant consideration in the design of the LN-742H and LN-742, as they are built with high-quality materials that withstand heavy use and challenging conditions. The rugged construction extends the lifespan of the machines, reducing the need for frequent repairs and servicing.

In summary, the Lincoln LN-742H and LN-742 welding machines exemplify advanced engineering and user-focused design. Their combination of powerful performance, portability, user-friendly features, and versatile applications makes them essential tools for professionals in the welding industry, paving the way for excellence in metal fabrication and repair.
Top Page Image Contents