THE LINCOLN ELECTRIC COMPANY
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
CUSTOMER ASSISTANCE POLICY
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of
our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers
based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such
information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information or advice.
As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision
of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsible manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the
customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change — This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
POWER FEED 10R K1780-2
RECOMMENDED EQUIPMENT
Power Wave F355i Contact Lincoln Automation at 216.383.2667 for information
Power Wave 455M Robotic K2262-3
Power Wave 455M/STT Robotic K2263-1
Power Wave 655R K1519-1
RECOMMENDED GENERAL OPTIONS
Water Connection Kit K590-7
4 Drive Rolls and Split Wire Guide See Chart on Page 4
14-Pin to 14-Pin Control Cables See Chart on Page 4
Cable Adapters See Chart on Page 4
Gun Bushings
Tweco®or Tregaskiss®K1500-2 (Optional)
Lincoln or D&F®K1500-1
Binzel or Lincoln Fast-Mate K489-7
Incoming Conduit Bushings
.025-1/16 in. (0.6-1.6mm) K1546-1
1/16-3/32 in. (1.6-2.4mm) K1546-2
Wire Straightener K1733-1
Magnum Low Drag Wire Conduit
15 ft. (5m) K515-15
25 ft. (7.6m) K515-25
50 ft. (15m) K515-50
Accu-Trak™ Drum Payoff Kit
20 in. drum K884-5
23 in. drum K884-6
TOTAL: