Lincoln Electric 11458, 11459, 11587 SAFETY PRECAUTIONS, WARNING

D-1

MAINTENANCE

D-1

RANGER® 305D (CE)

SAFETY PRECAUTIONS

• Have qualified personnel do all maintenance

and troubleshooting work.

• Turn the engine off before working inside the

machine or servicing the engine.

• Remove guards only when necessary to

perform maintenance and replace them when

the maintenance requiring their removal is

complete. If guards are missing from the

machine, obtain replacements from a Lincoln

Distributor. (See Operating Manual Parts List.)

• Read the Safety Precautions in the front of this

manual and in the Engine Ownerʼs Manual before

working on this machine.

• Keep all equipment safety guards, covers, and

devices in position and in good repair. Keep

hands, hair, clothing, and tools away from the

gears, fans, and all other moving parts when

starting, operating, or repairing the equipment.

Routine Maintenance

At the end of each dayʼs use, refill the fuel tank to

minimize moisture condensation in the tank. Running

out of fuel tends to draw dirt into the fuel system.

Also, check the crankcase oil level and add oil if

indicated.

WARNING FREQUENCY

DAILY OR BEFORE

STARTING ENGINE

MAINTENANCE REQUIRED

• FILL FUEL TANK.

• CHECK OIL LEVEL.

• CHECK COOLANT LEVEL.

• CHECK AIR CLEANER ELE-

MENT AND HOUSING FOR

DIRTY, LOOSE OR DAMAGED

PARTS.

• CHECK AIR INTAKE HOSE

FOR CRACKS OR LOOSE

CONNECTIONS.

• CHECK AIR INTAKE/EXHAUST

AREAS & RADIATOR FOR

DIRT. CLEAN AS NECESSARY.

• CHECK ALTERNATOR BELT

TENSION AND WEAR.

ITEM

MAKE AND PART NUMBER

OIL FILTER KUBOTA 70000-15241

AIR FILTER ELEMENT DONALDSON P822686

FUEL FILTER ELEMENT KUBOTA 15231-43560

BATTERY KUBOTA GROUP 58, 550 CCA

BELT KUBOTA 15881-97011

GLOW PLUGS KUBOTA 16851-65512

INLINE FUEL FILTER KUBOTA 12581-43012

ENGINE MAINTENANCE COMPONENTS

KUBOTA D722 DIESEL ENGINE

Service Intervals

Observe the following for service and maintenance. The lubricating

oil change intervals listed in the table below are for Classes CF,CE

and CD lubricating oils of API classification with a low sulfur fuel in

use. If the CF-4 or CG-4 lubricating oil is used with a high-sulfur

fuel, change the lubricating oil at shorter intervals than recommend-

ed in the table below depending on the operating condition.

Every 50 hours

Every 75 hours

Every 100 hours

Every 150 hours

Every 200 hours

Every 400 hours

Every 500 hours

Every 1 or 2 months

Every 800 hours

Every 1500 hours

Every 3000 hours

Every 2 years

Check of fuel lines and clamp bands.

Change of engine oil

Inspect/Clean air cleaner element

and Vacuator™ valve.

Cleaning of fuel filter.

Check the battery electrolyte level.

Check the fan belt tightness.

Check the radiator and hose clamps.

Replacement of oil filter cartridge

Check the intake air lines.

Replacement of Air Filter element.

Replacement of fuel filter element.

Cleaning of water jacket (radiator

interior).

Replacement of fan belt.

Recharging of Battery.

Check of valve clearance.

Check the fuel injection nozzle injec-

tion pressure.

Check of injection pump.

Check of fuel injector timer.

Replacement of battery

Replacement of radiator hoses and

clamp band.

Replacement of fuel pipes and

clamps.

Change the radiator coolant.(L.L.C.)

Replacement of intake air line.

•

*1,*2

Intervals Items

IMPORTANT

•These jobs should be done after the first 50 hours of operation.

*1 Air cleaner should be inspected/cleaned more often in dusty conditions than

the normal conditions.

*2 Follow Service Instructions and Installation Tips for air cleaner in

Section D.

*3 Consult your local KUBOTA Dealer for this service.

*4 Replace only if necessary.

Please see Engine Owners Manual for Warranty Statement in detail.