Lincoln Electric 140, 180 TECHNICAL SPECIFICATIONS 180 Amp units

2 Requirements For Maximum Output
In order to utilize the maximum output c apability of
the machine, a branch circuit capable of 25 amps at
120 volts, 60 Hertz is required.
A-2
INSTALLATION
POWER MIG (140, 180 MODELS)
A-2
TECHNICAL SPECIFICATIONS 180 Amp units (K2668-1 180C)
INPUT – SINGLE PHASE ONLY
RATED OUTPUT
OUTPUT
Standard Voltage/Frequency Input Current
240 V 50 Hz I1 max20 Amps
I1 eff 10.7 Amps
Voltage/DutyCycle Current Voltage at Rated Amperes
240 V 25% 130 Amps 20
Welding Current Range Open Circuit Voltage Wire Speed Range
30 - 180 Amps 34 V 50 - 500 in/min.
1.3 - 12.7 ( m/min.)
Input Voltage/Frequency Fuse or Breaker Size1Input Amps Power Cord
240 V 50 Hz 40 Amp Super Lag 20 15 Amp, 240 V,
Three Pin Plug
RECOMMENDED INPUT CABLE AND FUSE SIZES
Height Width Depth Weight
14.0 in 10.15 in 18.6 in 66 Ibs
357 mm 258 mm 472 mm 30 kg
PHYSICAL DIMENSIONS
1If connected to a circuit protected by fuses use Time Delay Fuse marked “D”.