A CLOSER LOOK
QUALITY AND RELIABILITY
•Engine hour meter to track scheduled maintenance.
•Automatic engine shutdown protection for low oil pressure or high water temperature.
•Electronic engine idler extends engine life and reduces fuel consumption.
•Attractive and durable pearlescent gray finish paint.
•Manufactured under a quality system certified to ISO 9001 requirements.
•
MACHINE SPECIFICATIONS
Product
Name
Pipeliner® 200D
| Ordering |
|
|
| Information |
| Description |
|
| ||
|
| 200 Amp | |
|
| ||
|
|
| DC Welder |
|
|
| All Copper |
|
|
| Windings |
|
| Pure DC Power | |
|
|
| Generator |
|
|
|
|
Rated DC Output(1)
Current/Voltage/Duty Cycle
Lincoln “Plus” Rating
200A /40V/60%
NEMA Rating
200A / 28V / 60%
DC Current
Fine Adjustment Range
40 - 300 Amps
220 - Max
160 - 240
120 - 190
80 - 130 Min - 90
Generator |
| Dimension |
Power |
| H(2) x W x L |
1750 Watts |
| 45.5 x 24.0 x 68.0 in |
| ||
DC Auxiliary Power |
| (1156 x 610 x 1727mm) |
15 Amps @ |
|
|
120V DC |
|
|
|
|
|
Weight lbs. (kg)
1311
(595)
(1)Based on a 10 minute period. High Altitude: For maximum rating, derate the output 4% for every 1,000 ft. (300 m) above 4,900 ft. (1,500 m).
(2)Height is to top of exhaust elbow. Case height is 40.9 in. (1039 mm).
ENGINE SPECIFICATIONS
Engine
Model
Kubota®
V2403M (Diesel)(3)
EPA Tier 4i
Description
4Cylinder 4 Cycle
Diesel Engine
Cast Iron Cylinders
Block / Crank Case
Horsepower & Displacement
27.8 HP @ 1600 RPM
149 cu in
(2.4 ltrs)
Ignition
Compression
Ignited
Capacities
FUEL:
15 Gals (57 Ltrs)
OIL:
8.0 Qts (7.6 Ltrs)
COOLANT:
9.5 Qts (9.0 Ltrs)
Operating
Speeds
FULL LOAD 1,600 RPM (200A/28V)
HIGH IDLE
LOW IDLE 1,400 RPM
Fuel
Consumption
0.9Gals./Hr
3.4Ltr/Hr
0.5Gals/Hr
1.7Ltr/Hr
0.4Gals/Hr
1.4Ltr/Hr
(3)Engine warranty for U.S. and Canada is 2 years/2,000 hours, 3 years major components. Some component limitations exist for Canada. See warranty statement for details.
CU ST OME R AS SIS TA N CE P OL IC Y
The business of The Lincoln Electric Company® is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to inquiries to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is specifically disclaimed.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
Pipeliner ® 200D
[3] | www.lincolnelectric.com |
