Lincoln Electric 215 XT warranty EN E R a L OP Tions

RECOMMENDED OPTIONS

G EN E R A L OP TIONS

Magnum® Connection Kit

Permits use of Magnum® 200, 300 and 400 gun and cable assemblies on POWER MIG® 215 XT.

Order K466-6

POWER MIG® 215XT Spool Gun Adapter

This kit is designed to allow the Magnum® SG or Magnum® 250LX spool gun to operate with the POWER MIG® 215XT. The kit includes the solenoid, gas lines, wiring harness and gun connection panel. The gun connection panel features a 6 pin MS-type connector for the Magnum® SG spool gun and a 7 pin MS-type connector for the Magnum® 250LX spool gun and a selector switch to choose which gun you are using.

Order K2703-1

Note the K2703-1 spool gun adapter disables the Magnum® 100SG capability.

Aluminum Feeding Kit

Conversion kit for welding with 3/64" (1.2 mm) 5356 aluminum wire. Includes drive rolls, contact tips (2), non-metallic wire guides and cable liner.

Order K1703-1

Spindle Adapter for 8" O.D. Spools

Permits 8" (200 mm) O.D. spools to be mounted on 2" (51 mm) O.D. spindles.

Order K468

Dual Cylinder Mounting Kit

Permits side-by-side mounting of two full size gas cylinders, with easy loading. Attaches easily to POWER MIG® 215XT undercarriage.

Order K1702-1

Canvas Cover

Welding Fume Extractors

Lincoln offers a wide variety of welding fume extraction environmental system solutions, ranging from portable systems easily wheeled around the shop to shop-wide central systems servicing many dedicated welding stations.

Request Publication E13.40

Magnum® 100SG Spool Gun

130 Amp, 30% Duty Cycle with 10 ft of cable length. Feeds .030-.035 inch diameter wire. Wire Feed Speed is set at the machine. Fixed wire spool brake with friction pads for 5356 wire. Fixed drive roll tension.

Order K2532-1

Factory Ready!

No Adapter Required!

Magnum® SG Spool Gun

250 Amp, 60% Duty Cycle with

25 ft. of cable length. Feeds

.025 - 3/64 inch diameter wire. Single Turn remote wire feed speed control at the gun. Adjustable wire spool brake and adjustable drive roll tension.

Order K487-25

Requires K2703-1 Adapter

Magnum® 250LX Spool Gun

300 Amp, 60% Duty Cycle with

25 ft. of cable length. Feeds

.025 - 3/64 inch diameter wire. Multi-Turn remote wire feed speed control at the gun. Deluxe wire spool break requires no adjustments. Adjustable drive roll tension and easy open wire drive rolls for easy wire loading. Ergonomic Sure Grip handle. Contact tip storage built in spool gun cover.

Order K2490-1

Requires K2703-1 Adapter

Protect your POWER MIG® when not in use. Made from attractive red canvas that is flame retardant, mildew resistant and water repellent. Fits any POWER MIG® machine with or without a gas cylinder in the cylinder rack. Will not fit if spool gun holder is attached to the machine.

Order K2378-1

	P OW E R MIG ® 215XT
[7]	www .lincolnelectric.com