Lincoln Electric 255XT warranty Quality and Reliability, Spool GUN Ready, Key Controls, Easy as

A CLOSER LOOK

Key Controls

A.Digital meter displays preset wire feed speed.

B.Presettable digital wire speed control with fine resolution at low settings.

C.Digital meter displays preset voltage setting and actual voltage while welding.

D.Built-in gun holder.

E.Presettable digital voltage control with fine resolution at low settings.

F.Angled gun connection for improved feedability.

G.Second gas solenoid for spool gun use.

QUALITY AND RELIABILITY

A

B

C D E

F

G

•Fan-As-Needed™(F.A.N.™) provides cooling of transformer and other components when welding, reducing power consumption, noise and extending welder life.

•Thermostatic protection from current overload and excessive temperatures.

•Printed circuit boards are environmentally-shielded using Lincoln's engineered potting and protective frame trays.

•Low input current draw for energy-efficient low cost operation.

•Power source line voltage regulation holds voltage setting constant to maintain weld quality even when the input voltage fluctuates ±10%.

•Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 Environmental Standards.

•Approved by Canadian Standards Association (CSA).

•Three-year warranty on parts and labor (90 days warranty on gun).

SPOOL GUN READY!

The POWER MIG® 255XT has built-in electronics to drive either a Magnum® SG Spool Gun or a Magnum® 250LX Spool Gun. In addition, a second gas solenoid is provided to supply and control

gas flow to the spool gun.

Easy as 1-2-3!

1Simply plug the spool gun control cable into the built-in 7-pin connector (Magnum® SG gun requires K2445-1, 6- to 7-pin

control cable adapter plug.)

Connect the spool gun’s power cable to the output terminal

2in the wire drive compartment.

3Hook the spool gun gas line to the solenoid gas fitting and you’re ready to weld!

1

2

3

	POWER MIG	® 255XT
[4]	www.lincolnelectric.com