Lincoln Electric 255XT warranty General Options

RECOMMENDED OPTIONS

GENERAL OPTIONS

Magnum® SG Spool Gun

250 Amp, 60% Duty Cycle with

25 ft. of cable length. Feeds

.025” - 3/64” inch diameter wire. Single Turn remote wire feed speed control at the gun. Adjustable wire spool brake and adjustable drive roll tension.

Order K487-25

Requires K2445-1 Adapter

Magnum® 250LX Spool Gun

300 Amp, 60% Duty Cycle with

25 ft. of cable length. Feeds

.025” - 3/64” inch diameter wire. Multi-Turn remote wire feed speed control at the gun. Deluxe wire spool break requires no adjustments. Adjustable drive roll tension and easy open wire drive rolls for easy wire loading. Ergonomic Sure Grip handle. Contact tip storage built in spool gun cover.

K2490-1

Factory Ready

Dual Cylinder Mounting Kit Permits side-by-side mounting of two full size gas cylinders, with easy loading. Attaches easily to POWER MIG® undercarriage.

Order K1702-1

Canvas Cover

Protect your POWER MIG® when not in use. Made from attractive red canvas that is flame retardant, mildew resistant and water repellent. Fits any POWER MIG® machine with or without a gas cylinder in the cylinder rack.

Will not fit if spool gun holder is attached to the machine.

Order K2378-1

Aluminum Feeding Kit Conversion kit for welding with 3/64" (1.2 mm) aluminum wire. Includes drive rolls, contact tips (2), non-metallic wire guides and cable liner.

Order K1703-1

Magnum® SG Spool Gun Control Cable Adapter

Allows the K487-25 Magnum® SG Spool Gun’s 6-pin control cable plug to connect to the POWER MIG® 255XT’s 7-pin spool gun control cable receptacle.

Order K2445-1

Magnum® 250LX Spool Gun Control Cable Extension Extend your spool gun reach with a 25 ft. (7.6 m) Control Cable Extension. Features a 7-pin female MS-type connector on the spool gun end and a 7-pin male MS-type connector on the power source end.

Order K2519-1

Spool Gun Holder

Provides neat storage of spool gun.

Order K1738-1

Magnum® Guns

Alternate guns can be used with the POWER MIG®, including Magnum® 200, 300 and 400 MIG (GMAW) models, as well as Magnum® 250XA Fume Extraction Gun.

See Publications E12.10 and E13.10 for details.

Note: Requires K466-6 Adapter Kit.

Magnum® Connection Kit Permits use of Magnum® 200, 300 and 400 gun and cable assemblies on POWER MIG®.

Order K466-6

8" O.D. Spool Adapter Permits 8" (200mm) O.D. spools to be mounted on 2" (51 mm) O.D. spindles.

Order K468

Welding Fume Extractors

Lincoln offers a wide variety of welding fume extraction environmental system solutions, ranging from portable systems easily wheeled around the shop to shop-wide central systems servicing many dedicated welding stations.

Request Publication E13.40

	POWER MIG	® 255XT
[ 7]	www.lincolnelectric.com