Lincoln Electric 400-MS warranty Performance, Self-Cleaning Filter, Extraction Arms

A CLOSER LOOK

PERFORMANCE

Self-Cleaning Filter

The Mobiflex 400-MS filter has a surface area of 30 m2 (325 ft2) with ExtraCoat® pretreatment and the unique 3D-pleated structure results in a high filter efficiency, a longer life, and low operational costs. The ExtraCoat® pretreatment fills the micro pleats in the filter and reduces moisture. This increases its efficiency from the start of usage.

An electronic pressure differential system measures the static air pressure as it enters and exits the filter cartridge. If the air pressure entering the filter unit is greater than the air pressure exiting the fil- ter unit, the electronic circuit signals the cleaning system to clean the filter cartridge. The cleaning of the filter, segment by segment, with compressed air results in maximum airflow.

Compressed air from the internal tank releases through multiple air- jets to clean one section of the filter at each air burst. A complete cleaning cycle can be activated by depressing a manual switch on

Extraction Arms

No matter if you are working in a small work station, under a low ceiling, or in a large fabrication area, one of Lincoln Electric’s® vari- ous fume extraction arms for welding will work for you. The flexible extraction arms are built the Lincoln® way—rugged and reliable. Low vacuum extraction arms are designed for high volume/low velocity air movement to enable the arm to be positioned at a distance of 6-12 inches (152-304 mm) from the welding source. Designed with the welder in mind, the arms provide welders optimal motion and reach for their specific welding position(s) and work area.

The arms come equipped with the 360° rotatable hood for optimal positioning to welding source. This allows a larger work envelope with less repositioning of the arm and increased operator visibility. With the extraction arm correctly positioned, the welding fume par- ticulate can be effectively drawn away from the operator’s breathing zone, as well as eliminate the residual fume particulate that often rises and hovers within the facility.

With a unique spring-balanced internal mechanism, Lincoln’s® fume extraction arms provide a long-lasting, user-friendly solution. The extraction arms external shell is made of solid, lightweight 203 mm (8 in.) diameter dent and scratch resistant tubing. Incorporated into the arm is an airflow throttle valve and extraction focus spoiler. A clear halogen lamp and automatic start/stop are available as rec- ommended optional features. With the use of an arc sensor, the system automatically starts and stops the fan unit, providing hands- free operation and helping to conserve energy. All this combined provides a highly effective system with maximum efficiency and minimal disruption to welder productivity.

the front of the control panel. The particulate is blown off the filter cartridge into a plastic collection bin. If cleaning the filter cartridge is no longer effective, the electronic circuit will indicate a full filter cartridge by blinking the light on the front control panel.

Self-Cleaning Filter

Rotatable Hood
5 m
(16 ft.)		LFA 4.1
4 m
(13 ft.)
				LFA 3.1
3 m
(10 ft.)
2 m
(6.5 ft.)
1 m
(3 ft.)
0 m				400-M S
(0 ft.)
4 m	3 m	2 m	1 m	0 m
(13 ft.)	(10 ft.)	(6.5 m)	(3 ft.)	(0 ft.)

Mobiflex™ 400-MS Reach

Mobiflex™ 400-MS

[2] www.lincolnelectric.com