Outside of the appliance

Before taking the container out, make sure that the drain button is in the closed

position .

Wait at least 2 hours before taking the full container out of the appliance.

Take out the container - Fig. 20

Carry the container with both hands. Store it in a cool dry place away from light. It is not necessary to store oil in a refrigerator - Fig. 21

Always keep the container in a horizontal position with the lid on top.

You can store your different types of oils/fats in several separate containers which are sold as accessories. Diagrams shown on the container lid help to identify the type of oil contained inside.

Reusing the fat/oil

Hold the container carefully.

For oil:

Remove the cap located on the container lid. Empty the oil in the bowl - Fig. 22

For solid fat:

Remove the lid from the container.

Turn the container over and press on it so as to loosen the fat - Fig. 23

Empty the fat from the container’s fill tube. Cut the fat into pieces then tip them into the bowl, without the basket - Fig. 24

Change the fat/oil every 8 to

12 uses. A “clean” fat preserves the taste quality and lightness of foods as well as limiting smells.

Diagrams on the container’s lid show you the different handling operations.

Replacing the container

Refit the lid on the container and close the cap.

Place the drain button in the closed

position - Fig. 9

Insert the container into the appliance - Fig. 25

Changing the carbon filter

Open the fryer's lid.

Take out the filter using the holding tabs - Fig. 26

Replace the new filter in the lid.

For the filter to work properly, change it after every 80 times you fry.

If the filter falls into the hot fat, you have to change the fat and the filter.

Cleaning

Oléoclean is very easy to clean thanks to its exclusive system - Fig. 6

TOTAL MAGICLEAN

You can put the following into the

DISHWASHER:

-basket,

-lid (with FILTER),

-bowl,

-automatic drain valve and filter grid,

-housing, after removing the control panel,

-oil/fat container.

Press the red part of the drain button to empty it.

Press the red part of the drain button to empty it.

Take care the dishwasher rotating blades do not damage any of the fryer parts.

Cleaning the window

For good visibility, put the lid through the dishwasher or clean it with a sponge dipped in washing-up liquid - Fig. 27 Leave the window to dry in the surrounding air or wipe it with a clean cotton cloth. Replace the lid.

Clean the window each time the fryer has been used.

Position the lid at 45° in the dishwasher, with the window upwards.

Cleaning the removable bowl

The browning and scratches which may appear after long use are normal.

We guarantee that the non-stick coating complies with regulations concerning materials in contact with foodstuffs.

Page 9
Image 9
Groupe SEB USA - T-FAL Thermostat manual Cleaning