You can clean your bowl in the dishwasher. Be careful not to damage the coating with the racks in the dishwasher. Avoid distorting your bowl (particularly the outsides) through knocks or a fall.

To retain the non-stick qualities for as long as possible, do not use metal tools.

If however your bowl becomes misshapen, obtain a replacement from your approved Service Centre.

For more thorough cleaning

Cleaning the oil/fat container

Clean the oil/fat container with water to which you have added some washing-up liquid or put it through the dishwasher, removing the lid.

Dry it off.

Cleaning the drain valve Completely immerse the valve in a container of hot water to which you have added some washing-up liquid, pressing on the red part - Fig. 28

Leave to soak for a few minutes.

Press again on the red part to rinse and empty the drain valve.

We recommend that you change the drain button and its seal and/or filter grid if they are dammaged.

Cleaning the container’s fill tube

To empty solid fat from the fill tube: Remove the container from the fryer and empty it - Fig. 20

Place the drain button in the open

position - Fig. 19

Position the container upright, with the fill tube facing you.

Remove the black cap - Fig. 29 Empty the solidified fat from the tube - Fig. 30

Replace the black cap (according to diagram) - Fig. 31

Replace the drain cap in closed

position

- Fig. 9

Page 10
Image 10
Groupe SEB USA - T-FAL Thermostat manual For more thorough cleaning, Cleaning the oil/fat container