FEATURES
PERFORMANCE
•The Idealarc® DC-600 is a multiprocess DC arc welding power source that produces outstanding arc characteristics on both constant voltage and constant current processes. This provides great welding versatility in a single power source.
•The Idealarc DC-600 is designed for GMAW (MIG), FCAW, and submerged arc welding processes within the capacity of the machine, plus the capability of stick, and air carbon arc gouging up to 3/8” (10mm) diameter. It produces outstanding performance with a single range continuous control potentiometer.
FEATURES
•3-position field or factory installed Multi-Process Switch option allows quick change from electrode positive or negative semiautomatic/automatic wire feed welding to stick, TIG or air carbon arc gouging.
• Air carbon arc gouge with up to 3/8" (10mm) diameter carbons.
Key Controls
1.Ammeter/Voltmeter
2.Local/Remote Output Control
3.Output Control Potentiometer
4. Mode Selection Switch
5.Weld Terminals On or Remotely Controlled
6.On/Off Switch
7.Power Source Pilot Light
8. Strain Relief for Terminal Strip Connection | | 8. |
|
9.14-Pin MS-Style Connector for Wire Feeder Connection
10.115 VAC, 15A Covered Outlet
10.9.
QUALITY AND RELIABILITY
•Fan-cooled with electronic and thermostatic protection from current overload and excessive temperatures.
•Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.
•Three-year warranty on parts and labor.
•Seven-year warranty on the power rectifier.
Idealarc DC-600
[2] | www.lincolnelectric.com |
