POWER WAVE®i400

InputPower 200/230/380-415/460/575
3Phase Input
50/60Hz
*Singleproduct number - CE compliance is provided with a CE Filter
Kit. Input voltage is limited to 380-415/3/50/60 with kit installed.
DutyCycle 350A/34V/100%
400A/36V/60%
420A/37V/40%
*No derating for CV versus Pulse modes.
OutputCurrent Range 5-420ADC
*Best in class rated machine for power.
OutputVoltage Range 10-37VDC
CoolingMethod FanAs Needed™ (F.A.N.)
*Cooling fan runs when the output is energized, and for 5 minutes after
theoutput has been turned of f.
PowerFactor at Rated Output .95
IPRating IP21S
WeldingOutput CV/DC
WeldingProcesses CV-MIG,Pulsed-MIG, Flux-cored, Metal-cored, Stainless, Aluminum
Dimensions- H x W x D in (mm) 21x 18.5 x 23.6 in (533 x 470 x 600 mm )
NetWeight - lbs (kg) 209lbs. (95 kg)
Volume 0.150m3
UniversalCertifications CE,CSAC/UL, C-Tick

AUTODRIVE™4R90

WireDrive 4 Driven Rolls
*4 Gear powered rolls versus competitive 2 gear driven rolls & 2 idle rolls
MotorType Permanent Magnet DC Motor
TachometerType MagneticHigh Resolution Dual Channel
WireFeed Speed Range in/min (m/min) AutoDrive™4R90 - 50 to 800 in/min (0.8 to 20.3 m/min)
MaxWire Size Range AutoDrive™4R90
Solid: .023 - .045” (0.6 – 1.2 mm)
Cored: .035 - .045 (0.9 - 1.2 mm)
Dimensions– L x W x H inches (mm) 9.1x 7.5 x 8.4 inches (231 x 141 x 213 mm)
NetWeight - lbs (kg) 14.5lbs. (6.5 kg)
UniversalCertifications CE,CSAC/UL, C-Tick
THE L INCOL N ELEC TRI C COMPA NY
22801St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
TECHNICAL SPECIFICATIONS
CU S T O M E R AS S I S TA N C E PO L I C Y
Thebusiness of The Lincoln Electric Company®is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of
ourcustomers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Ouremployeesrespond to
inquiriesto the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not
ina position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume
anyliability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or
impliedwarranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is
specificallydisclaimed.
LincolnElectric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remainsthe sole responsibility of the
customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subjectto Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.