Work Cable Connection

A-5	INSTALLATION	A-5

1.Connect the terminal marked (below the recon- nect panel) to an earth ground.

2.Connect the input leads to terminals marked L1 (U) and L2 (V) on the reconnect panel. Use a single phase line or one phase of a two or three phase line.

3.On multiple input voltage welders, be sure the reconnect panel is connected for the voltage being supplied to the welder.

CAUTION

Failure to follow these instructions can cause immediate failure of components within the welder.

------------------------------------------------------------------------

Welders are shipped connected for the highest input voltage as listed on the rating plate. To change this connection, designations on the reconnect panel LOW, MID, and HIGH correspond to the name plated input voltages of a triple voltage welder. Dual voltage welders use only LOW and HIGH.

EXAMPLE: On a 208/230/460 volt welder, LOW is 208V, MID is 230V, and HIGH is 460V.

Note: Export model has a voltage range for LOW and MID connections: LOW is 220-230V, MID is 380-400V and High is 415V.

Reconnect the jumper strap to the terminal stud corre- sponding to the input voltage level used. Make sure all connections are tight.

Recommended Cable Sizes for Combined Lengths of Copper Work and Electrode Cables using 75o C Wire:

Machine Rating	0 to 100 Ft.	101 to 200 Ft	201 to 250 Ft

275A/40%	#1 (42.4 mm2)	1/0 (53.5 mm2)	2/0 (67.4 mm2)

A 15’ (2/0) weld cable with clamp is available (K2150-1), or included with the Precision TIG Welding Package model. Otherwise, it is user provided.

With power source off, connect a separate work cable to the 1/2-13 threaded "WORK" stud of the welder, and secure a tight connection with the flange nut provided. The work cable should be routed through the cable strain relief hole provided in the base directly below the welding output terminal.

Note: If the Precision TIG is equipped with an Under- Cooler or Under-Storage unit, the coiled work cable and clamp, or excess work cable length, may be con- veniently stored in the drawer while remaining con- nected.

STICK ELECTRODE CABLE CONNECTION

If manual stick welding is desired, with power source off, connect a stick electrode cable to the 1/2-13 threaded "STICK Electrode" stud of the welder, and secure a tight connection with the flange nut provided. The electrode cable should be routed through the cable strain relief hole provided in the base directly below the welding output terminal.

OUTPUT CABLES, CONNECTIONS AND LIMITATIONS

WARNING

•To avoid being startled by a high frequency shock, keep the TIG torch and cables in good condition

•Turn the power switch of the power source OFF before installing adapters on cable or when con- necting or disconnecting adapter plugs to power source.

-----------------------------------------------------------------------

Refer to Figure A.2 for the location of the WORK and STICK terminals, as well as the TIG Torch connection panel.

WARNING

DISCONNECT STICK ELECTRODE WELDING CABLE WHEN TIG WELDING.

EVEN THOUGH HI-FREQ IS NOT APPLIED TO THE PRECISION TIG STICK TERMINAL, IT WILL BE ELECTRICALLY "HOT" TO WORK WHEN TIG WELDING.

------------------------------------------------------------------------

PRECISION TIG 275

IM702-A specifications

The Lincoln Electric IM702-A is a versatile and innovative welding machine that has garnered attention for its advanced features and robust performance. Designed for various welding applications, the IM702-A is a go-to choice for professionals in the industry, offering precision, reliability, and ease of use.

One of the standout characteristics of the IM702-A is its advanced inverter technology. This allows for a lightweight and compact design, making it easier to maneuver in tight spaces compared to traditional welding machines. The inverter technology also contributes to energy efficiency, reducing power consumption without compromising on performance.

The IM702-A features a multi-process capability, enabling it to perform MIG, TIG, and Stick welding with ease. This versatility makes it ideal for a wide range of projects, from industrial manufacturing to home repairs. Users can seamlessly switch between different welding processes, enhancing productivity and streamlining workflow.

In terms of user interface, the Lincoln Electric IM702-A is designed with convenience in mind. It boasts a digital display that provides real-time information on welding parameters, making it easier for operators to monitor and adjust settings as needed. The intuitive controls are user-friendly, allowing even novice welders to achieve professional-quality results.

The machine also includes advanced weld control features, such as precise amperage and voltage adjustments. These controls ensure that users can achieve optimal settings for different materials and thicknesses, resulting in clean, strong welds. Additionally, the IM702-A is equipped with an automatic voltage adjustment feature, which helps maintain consistent performance under varying input conditions.

Durability is another key selling point for the IM702-A. Built with high-quality materials and engineering, this welding machine is designed to withstand the rigors of daily use in demanding environments. Its rugged construction provides reliability and longevity, ensuring that it remains a valuable asset in any workshop.

Lastly, safety is a priority in the design of the IM702-A. It includes several built-in safety features, such as thermal overload protection and a stabilized arc performance that reduces the risk of arc blow, protecting both the operator and the equipment.

Overall, the Lincoln Electric IM702-A stands out in the welding market due to its advanced technologies, multi-process capabilities, user-friendly interface, and robust safety features, making it an excellent choice for professional welders seeking high-quality performance and versatility.

Lincoln Electric IM702-A manual Work Cable Connection, Stick Electrode Cable Connection

Models: IM702-A

INSTALLATION