III.INSTALLATION
A. CABLE CONNECTION
Take the cable CCBLA-055-2 out of the accessory bag and connect the 6 pin DIN male plug of the cable to the central 6 pin female connector at the bottom of the programmable keyboard (ref. Fig. 3-1), connect the other end (5 pin DIN male plug) to the PC or a compatible system. Connect the PC keyboard or any other keyboard wedged input device such as a CCD scanner to the 5 pin DIN female connector at the bottom of the programmable keyboard if such connection is required.
For installation in a PS2 or a compatible system with a PS2 interface type KB3100, the cable in the accessory bag should be CCBLA-055-1. Connect the 6 pin DIN male plug of cable CCBLA-055- 1 to the central 6 pin DIN female connector at the left of the bottom of the programmable keyboard as the way for PC. Connect the mini DIN 6 male plug of the cable to the PS2 or a compatible system. Connect the PS2 keyboard or other PS2 keyboard wedged device like a CCD scanner to the 6 pin mini DIN female connector at the bottom of the programmable keyboard.
Monitor
PC
PC KB
CCBLA-055-2
KB3100
Fig. 3 - 1
