Lincoln Electric IM810 manual Maintenance Safety Precautions, Routine Maintenance

Models: IM810

1 36
Download 36 pages 11.33 Kb
Page 23
Image 23

D-1

MAINTENANCE

D-1

MAINTENANCE

SAFETY PRECAUTIONS

WARNING

ELECTRIC SHOCK can kill.

• Disconnect input power by removing plug from receptacle before working inside Pro-MIG 175. Use only grounded receptacle. Do not touch electrically “hot” parts inside Pro-MIG 175.

Have qualified personnel do the mainte- nance and trouble shooting work.

ROUTINE MAINTENANCE

POWER SOURCE COMPARTMENT

In extremely dusty locations, dirt may clog the air passages causing the welder to run hot. Blow dirt out of the welder with low pressure air at regular intervals to eliminate excessive dirt and dust build-up on interval parts.

WIRE FEED COMPARTMENT

1.When necessary, vacuum accumulated dirt from gearbox and wire feed section.

2.Occasionally inspect the incoming guide tube and clean inside diameter if necessary.

3.Motor and gearbox have lifetime lubrication and require no maintenance.

FAN MOTOR

Has lifetime lubrication — requires no maintenance.

WIRE REEL SPINDLE

Requires no maintenance. Do not lubricate shaft.

Pro-MIG 175

Page 23
Image 23
Lincoln Electric IM810 manual Maintenance Safety Precautions, Routine Maintenance