Lincoln Electric IM818 manual Contact Tips for Prince XL Air/Water Cooled Barrels

SECTION C

3.Tighten.

4.Using a 5/32” hex wrench, turn the Idler Roll tension screw into the gear- box housing and reference the Gearbox Assembly drawing to adjust the pressure against the drive roll.

NOTE:

Lock washer must be under idler roll or it will not turn freely.

ACCESSORIES

CONTACT TIPS - AIR/WATER BARREL

Contact Tips for Prince® XL Air/Water Cooled Barrels

Wire Size		Tip I.D.	Arc		Length		MK P/N		LE P/N
.030” (0.8mm)	.040” (1.0mm)		Spray	1-5/8” (41.3mm)			621-0390		KP2217-1B1
			Short	1-7/8” (47.6mm)			621-0396		--
.035” (0.9mm)	.044” (1.1mm)		Spray	1-5/8” (41.3mm)			621-0391		KP2217-2B1
			Short	1-7/8” (47.6mm)			621-0397		--
.045” (1.2mm)	.053” (1.3mm)		Spray	1-5/8” (41.3mm)			621-0392		--
			Short	1-7/8” (47.6mm)			621-0398		--
.052” (1.3mm)	.060” (1.5mm)		Spray	1-5/8” (41.3mm)			621-0393*		KP2217-4B1
			Short	1-7/8” (47.6mm)			621-0399		--
1/16” (1.6mm)	.075” (1.9mm)		Spray	1-5/8” (41.3mm)			621-0394		KP2217-5B1
			Short	1-7/8” (47.6mm)			621-0400		--
1/16” (1.6mm)	.085” (2.1mm)		Spray	1-5/8” (41.3mm)			621-0395		--
All tips stamped with tip I.D.
*Standard - furnished with torch
FINNED COPPER GAS CUPS
AIR/WATER COOLED BARREL								Tip Extender
		Finned Copper Gas Cups for
		Prince® XL Air/Water Cooled Torch
Size		I.D.			MK P/N			LE P/N
6		3/8” (9.5mm)			621-0248			KP2213-1
8		1/2” (12.7mm)			621-0249			KP2214-1
10		5/8” (15.8mm)			621-0250*			KP2215-1
10 H.D.		5/8” (15.8mm)			621-0251			KP2216-1
12 H.D.		3/4” (19.0mm)			621-0252			--
N/A		Tip Extender			621-0424			KP2244-1
*Standard - furnished with torch
TORCH BARREL LINERS
		Prince® XL Torch Barrel Liners
	Description					MK P/N			LE P/N
Tefl on liner package, 5 pieces						931-0137			KP2226-1
Bulk tefl on liner material for .030-.063” (.8-1.6mm)						615-0178		---
Bulk tefl on liner material for .030-.035” (.8-.9mm)						615-0177		---

Prince XL® - Owner's Manual - Page 8