Lincoln Electric IM818 manual Section A, Installation, PRINCE XL TORCH - 25’- P/N K2296-2

SECTION A

INSTALLATION

TECHNICAL SPECIFICATIONS

PRINCE® XL TORCH - 25’- P/N K2296-2

Wire Capacity

•.023”-.045” (0.6 - 1.2mm) solid and hard wire

•.030” - 1/16” (0.8 - 1.6mm) aluminum and cored wire

Wire Speed

•750 ipm (19.0 mpm) max.

Duty Cycle - 100%

All ratings are at 25V using Argon Gas

•200 Amps Air cooled standard, using Air/Water barrel Torch weight (less leads & standard barrels)

•36.4 oz. (1.02 kilogram)

PRINCE® XL SPOOL GUN - 25’ - P/N K2297-2

Wire Capacity

•.023” - .045” (0.6 - 1.2mm) solid and hard wire

•.030” - 1/16” (0.8 - 1.6mm) aluminum and cored wire

Wire Speed *

•750 ipm (19.0 mpm) max.

Spool Size

•4 inches (101.6mm)

Duty Cycle - 100%

All ratings are at 25V using Argon Gas

•200 Amps Air cooled standard, using Air/Water barrel

Torch weight (less wire & leads)

•46.5 oz (1.3 kilogram)

* Maximum ipm varies depending on input voltage, wire size and the control box used.

SUPPORT EQUIPMENT REQUIRED

•CV or CC power source of suffi cient capacity for your needs.

•Regulated gas supply and hoses.

•Properly sized power leads from power source to wire feeder and ground.

TORCH LEAD CONNECTIONS

POWER CABLE - AIR COOLED

A #2 AWG power cable is used on the Prince®XL air cooled torch. The torch end is threaded into the torch body. The power cable fi tting connects to the Power Block.

(MK P/N 003-1674) when using a Cobramatic® wire feed cabinet. When the Prince®XL is purchased as a Spool Gun, the power cable comes standard with a lug connector and should be connected to positive lug of power supply.

CONDUIT

The Prince™XL Torch comes standard with a poly lined conduit, for running aluminum wire. The longer fi tting with a shallow groove is used on the torch end. A set screw located on top of the torch handle secures the conduit in

Prince XL® - Owner's Manual - Page 3