OPERATION | ||
“ | RANGE” SWITCH |
|
The “Range” switch is used to select one of three amperage ranges with generous overlap for Stick/TIG welding, or one Wire Feed welding range.
Process | Range Setting | Current Range |
STICK/TIG | 90 Max. | 40 to 90 Amps |
(constant current) | 145 Max. | 70 to 145 Amps |
(3 range settings) | 210DC/225AC Max. | 120 to 210 (DC) 225(AC) |
|
|
|
WIRE FEED |
|
|
(constant voltage) | 15 to 25V | Up to 200 Amps |
(one range setting) |
|
|
|
|
|
CAUTION
Never change the “RANGE” Switch setting while welding. This will damage the switch.
“
CONTROL” DIAL
Provides a fine welding current adjustment within the Range Switch settings in the STICK mode and weld- ing voltage control with the Range switch set in the wire feed mode.
POLARITY SWITCH
Provides three selectable welding polarities:
AC, DC+ & DC-
CAUTION
Never change the Polarity switch setting while welding. This will damage the switch.
RANGER 10,000 APPROXIMATE FUEL CONSUMPTION
| KOHLER | HONDA | ROBIN / SUBARU | |
| 20 H.P. CH20S | 20 H.P. GX620KI | 20.5 H.P. EH64 | |
|
|
|
| |
Low Idle - No Load | .4 Gallons/Hour | .3 Gallons/Hour | .6 Gallons/Hour | |
2200 RPM | (1.5 Liters/Hour) | (1.3 Liters/Hour) | (2.3 Liters/Hour) | |
High Idle - No Load | .7 Gallons/Hour | .7 Gallons/Hour | .8 Gallons/Hour | |
3700 RPM | (2.8 Liters/Hour) | (2.8 Liters/Hour) | (3.0 Liters/Hour) | |
AC CC Weld Output | 1.2 Gallons/Hour | 1.3 Gallons/Hour | 1.5 Gallons/Hour | |
225 Amps @ 25 Volts | (4.6 Liters/Hour) | (5 Liters/Hour) | (5.8 Liters/Hour) | |
DC CC Weld Output | 1.3 Gallons/Hour | 1.5 Gallons/Hour | 1.6 Gallons/Hour |
|
210 Amps @ 25 Volts | (4.9 Liters/Hour) | (5.9 Liters/Hour) | (6.1 Liters/Hour) | |
DC CV Weld Output | 1.2 Gallons/Hour | 1.2 Gallons/Hour | 1.2 Gallons/Hour | |
200 Amps @ 20 Volts | (4.5 Liters/Hour) | (4.5 Liters/Hour) | (4.5 Liters/Hour) | |
Auxiliary Power | 1.4 Gallons/Hour) | 1.7 Gallons/Hour) | 1.6 Gallons/Hour) | |
9000 Watts | (5.3 Liters/Hour) | (6.5 Liters/Hour) | (6.1 Liters/Hour) | |
|
|
|
|
|
RANGER 10,000
