Lincoln Electric K487-25 SG Control Module, Order K488 Control Module Input Cable, Order K1738-1

RECOMMENDED OPTIONS

GENERAL OPTIONS

SG Control Module

Provides control of wire speed and gas flow. For use with CV power sources and CV Engine Drives with output contactor.

Order K488

Control Module Input Cable

–Terminal Strip and Lug Required for connection of control module to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0 m). For Lincoln® power sources having terminal strip and lug connec- tions.

Order K492-10

Control Module Input Cable

–14-pin MS-type & Twist-MateTM

Required for connection of control module to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0 m). For Lincoln® power sources having

14-pin MS-type control connec- tions and Twist-MateTMpower connections.

Order K493-10

Control Module Input Cable

–14-pin MS-type, 115 Volt Plug & Lug

Required for connection of control module to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0 m). For Lincoln® engine driven power sources with 14-pin MS-type connection, separate 115V NEMA receptacles and lug power connections.

Order K691-10

Magnum® SG Spool Gun Control

Cable Adapter

Allows the K487-25 Magnum® SG Spool Gun’s 6-pin control cable plug to connect to the Power MIG® 255C’s 7-pin spool gun control cable receptacle.

Order K2445-1

SP-255/Wire-Matic™Spool Gun

Adapter Kit

Enables the SP-255 and Wire- MaticTM 255 wire feed welders to accept the K487-25 spool gun.

Order K672-1

Power MIG® 215 and Power MIG 200 Spool Gun and Adapter Kit This kit includes the K487-25 spool gun, spool gun holder,gas hose kit and easy spool gun connection in the wire drive compartment of the Lincoln Power MIG 215 and Power MIG 200 wire feed welder.

Order K1809-1

Power MIG® 255 Spool Gun

Adapter Kit(1)

Enables the Power MIG 255 wire feed welder to accept the K487-25 Magnum® SG Spool Gun or a Prince® XL Spool Gun. (Includes a spool gun holder).

Order K2310-1

Spool Gun Holder for Power MIG®

Provides neat storage of spool gun cable, and gas hose on power source. Also provides hard- ware for routing gas hose inside power source when using a Prince XL gun. Note: Included in K1809-1 and K2310-1.

Order K1738-1

Note: Prince® XL Gun is a registered trademark of MK Products, Inc.

(1)Not required for Power MIG® 255C.

EXPENDABLE PARTS

Description	Order Number
Teflon Liner	KP2010-1
Plastic Guide Tube	KP2010-2
Contact Tip Notched .030"	KP2010-3B1
Contact Tip Notched .035"	KP2010-4B1
Contact Tip Notched 3/64"	KP2010-5B1

Description	Order Number
Gas Diffuser	KP2010-6
Contact Tip .023-.025	KP2010-7B1
Drive Roll Smooth	KP2010-8
Drive Roll Knurled	KP2010-9

Magnum® SG Spool Gun

[3] www.lincolnelectric.com